Bosch GNH 18V-35 - Blue

Not Available Bosch GNH 18V-35 - Blue

CORDLESS PRECISION: Achieve mark-free fastening with reduced recoil and no-mar pads. CONSISTENT PO...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Bosch GNH 18V-35 is a cordless pin nailer designed for professionals who require precise, mark-free fastening. Its key benefit is consistent power delivery and damage prevention thanks to a brushless motor and dry fire lock-out. A potential caveat is that it is supplied as body only, meaning batteries and a charger must be purchased separately.

All features

Colour	Blue
Model Part Number	0601482700
Brand	Bosch

Extended Product Information

FAQs

What is the maximum pin length this tool can handle?

The Bosch GNH 18V-35 can handle pin lengths from 15 mm up to 35 mm.

Does this nail gun come with a battery and charger?

No, the Bosch GNH 18V-35 is supplied as 'body only.' You will need to purchase a compatible Bosch 18V Professional System battery and charger separately.

How do I prevent marring on soft surfaces?

The tool comes with special no-mar pads designed to protect the workpiece surface. Ensure the correct pad is attached and used properly.

What is the function of the dry fire lock-out?

The dry fire lock-out prevents the tool from firing when the magazine is empty. This protects the tool from potential damage and prevents accidental marks on your work surface.

Can I use this tool for sequential firing?

Yes, this tool features a single sequential actuation + full sequential actuation triggering system, allowing for both precise placement and rapid firing modes.

What is the magazine capacity?

The magazine capacity for the Bosch GNH 18V-35 is 110 pins.

How do I adjust the depth of the pin?

Depth adjustment is stepless. Simply turn the adjustment knob located on the tool to set the desired depth precisely.

Troubleshooting

Tool does not fire a pin.

Check if the battery is inserted correctly and sufficiently charged. Ensure the magazine is loaded with pins and the dry fire lock-out is disengaged (i.e., magazine is not empty). Verify the contact tip is pressed firmly against the workpiece.

Pins are not driven to the correct depth.

Adjust the stepless depth setting. If pins are too shallow, increase the depth setting; if too deep, decrease it. Ensure you are using the correct pin length for the material.

Tool jams.

Remove the battery. Carefully clear any obstruction from the pin channel and magazine. Refer to the manual for specific jam clearing procedures.

No-mar pad is damaged.

Replace the damaged no-mar pad with a new one to prevent workpiece damage.

Pros and Cons

Pros

Delivers precise, mark-free fastening for professional finishes.
Consistent power output ensures reliable performance.
Dry fire lock-out prevents accidental blank firing.
Lightweight design enhances user comfort and maneuverability.
Tool-free depth adjustment for quick changes.

Cons

Supplied as body only; battery and charger sold separately.
Limited to pin nails up to 35mm in length.
Requires Bosch 18V system batteries, potentially adding to initial cost if not already owned.

Setup, Compatibility & Care

Setup:

Ensure you have a compatible Bosch 18V Professional System battery charged and ready.
Insert the battery into the tool until it clicks into place.
Select the appropriate no-mar pad for your material and attach it if necessary.
Adjust the depth setting using the stepless depth adjustment knob to your desired level.
Load Bosch pins (0.6mm diameter, 15-35mm length) into the magazine.

Compatibility:

Batteries: Compatible with all Bosch 18V Professional System batteries.
Nails: Compatible with Bosch pins of 0.6mm diameter and lengths ranging from 15mm to 35mm.

Care:

Cleaning: Regularly wipe down the exterior of the tool with a dry or slightly damp cloth. Keep the magazine and pin channel clean from dust and debris.
Storage: Store the nail gun in a dry, protected environment. Remove the battery when storing for extended periods.
Maintenance: Periodically check the no-mar pads for wear and replace if necessary. Ensure the magazine mechanism moves freely.