Outsunny 2200W Power Washer 170 Bar Pressure - Blue


This Outsunny 2200W Power Washer is designed for homeowners tackling stubborn cleaning tasks. Its 170 bar pressure and 420 L/hr flow rate provide a powerful solution for dirt and stains. While versatile with adjustable nozzles and a generous cord/hose length, users should be mindful of the specific water pressure required for delicate surfaces.
| Colour | Blue |
|---|---|
| Model Part Number | 5063603034969 |
| Brand | Outsunny |
The Outsunny 2200W Power Washer delivers a maximum pressure of 170 bar.
It has a flow rate of 420 litres of water per hour.
It is recommended to use a wider nozzle angle (higher degrees) and test on an inconspicuous area first, as the high pressure may be too intense for delicate surfaces. Always start with lower pressure settings.
The power cord is five metres long, and the high-pressure hose is six metres long.
Basic assembly is typically required, involving connecting the hose, spray gun, and potentially attaching the wheels. Refer to the user manual for specific instructions.
Regular maintenance includes checking for blockages in filters and nozzles, inspecting hoses and cords for damage, and storing the unit in a dry environment.
Check that the water tap is fully open, the water hose is securely connected and not kinked, and the power is switched on. Ensure the inlet filter is not blocked.
Verify the water supply pressure is adequate. Check for blockages in the hose, nozzle, or inlet filter. Ensure the nozzle is correctly attached and not damaged.
Confirm the power cord is securely plugged into a working outlet. Check if a circuit breaker has tripped. Ensure the power switch is in the 'on' position.
Inspect all hose connections and ensure they are tight. Check the spray gun and lance for cracks or damage. Examine the main unit for any visible cracks or seal failures.
Setup: Ensure the power washer is placed on a stable surface near a water source and power outlet. Connect the water hose to the inlet and a suitable water tap. Attach your desired nozzle to the spray gun. Plug the power cord into a grounded electrical outlet.
Compatibility: This pressure washer requires a standard outdoor water tap connection and a grounded electrical outlet. It is compatible with most standard garden hoses.
Care: After each use, disconnect the water and power supply. Run the pressure washer for a few seconds to clear any remaining water from the pump. Store the unit in a dry place. Regularly inspect the hose and power cord for damage. Clean the filter (if applicable) according to the manufacturer's instructions to maintain optimal performance.