Connect Brass Olive Stepped - 200pc - 5/32in
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working with fluid control systems who need reliable sealing for compression fittings. The Connect Brass Stepped Olive offers a secure, leak-preventing solution for your plumbing needs, ensuring system integrity. A key consideration is ensuring proper fitting size to match the olive's 5/32 inch inner diameter.
All features
| Model Part Number | 31169 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What are these brass olives used for?
These brass stepped olives are used with compression fittings to create a secure, leak-preventing seal on tubing in fluid control systems.
What size tubing do these olives fit?
These olives have an inner diameter of 5/32 inches and are designed for tubing of the corresponding outer diameter.
How many olives are in a pack?
Each pack contains 200 brass stepped olives.
Can I reuse a brass olive?
It is generally not recommended to reuse a compression olive. Once compressed, it deforms to create a seal, and reusing it may result in a faulty connection.
What type of fittings are compatible with these olives?
These olives are specifically designed to be used with brass compression fittings.
Are these olives suitable for all types of fluids?
They are suitable for common fluids like water, air, and gas. For aggressive chemicals or specific industrial fluids, always check material compatibility charts.
What is the benefit of the 'stepped' design?
The stepped design helps the olive deform more uniformly when the compression nut is tightened, ensuring a tighter and more reliable seal against the fitting body and the tubing.
Troubleshooting
Leak detected after installation
Check if the compression nut is sufficiently tightened. Ensure the olive is correctly seated on the tube and the tube is fully inserted into the fitting. Verify the tubing diameter matches the olive's 5/32 inch specification.
Olive does not seem to seal properly
Ensure you are using a compatible brass compression fitting. Verify the tubing is not damaged or deformed where the olive seats. Re-seat the olive and retighten the nut.
Difficulty sliding olive onto tubing
Ensure the tubing end is clean and free of burrs. A small amount of compatible lubricant (e.g., pipe dope for gas lines, or water for water lines) can aid installation, but ensure it does not compromise the seal.
Pros and Cons
Pros
- Ensures a secure and leak-free connection.
- Made from durable, corrosion-resistant brass.
- Pack of 200 offers excellent value and quantity.
- Designed for precise compatibility with 5/32 inch fittings.
- Simple to install with standard compression fittings.
Cons
- Specific inner diameter limits compatibility to 5/32 inch tubing.
- Requires proper compression fitting and tightening technique for optimal performance.
- Brass can be sensitive to certain aggressive chemicals; compatibility should be checked.
- Not suitable for high-vibration applications without additional support.
Setup, Compatibility & Care
Setup:
- Slide the compression nut onto the tubing.
- Slide the Connect Brass Stepped Olive onto the end of the tubing, ensuring it is fully seated.
- Insert the tubing with the olive into the compression fitting body.
- Tighten the compression nut using appropriate wrenches until a secure seal is formed. Avoid over-tightening, which can damage the tubing or fitting.
Compatibility:
- These olives are designed specifically for use with brass compression fittings.
- The inner diameter of the olive is 5/32 inches. Ensure your tubing also has a 5/32 inch outer diameter to match.
- Suitable for use with water, air, gas, and some oil lines. Always verify chemical compatibility for specific fluids.
Care:
- Store olives in a clean, dry environment to prevent corrosion or contamination.
- Handle with clean hands to avoid transferring grease or dirt to the sealing surfaces.
- No specific maintenance is required for the olives themselves once installed, as the seal is permanent.