Aurora IP65 Fire Rated GU10 Downlight - Polished Chrome
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and installers seeking to understand and use the Aurora IP65 Fire Rated GU10 Downlight in Polished Chrome. This downlight provides a sleek, fire-rated, and water-resistant lighting solution for kitchens, bathrooms, and living spaces. Please note that the GU10 bulb is not included and must be purchased separately.
All features
| Colour | Silver |
|---|---|
| Brand | Aurora |
Extended Product Information
FAQs
What type of bulb does the downlight use?
The downlight uses a GU10 bulb.
Is the bulb included?
No, the GU10 bulb is not included and must be purchased separately.
What is the IP rating?
The IP rating is IP65, meaning it's protected against dust and water jets.
Is this downlight fire-rated?
Yes, it is fire-rated and tested for use in fire-rated ceilings.
What is the maximum wattage for the bulb?
The maximum wattage for the bulb is 7W.
What is the cut-out size required?
The cut-out size required is 75mm.
Where can I install this downlight?
It can be installed in kitchens, bathrooms, and other living spaces.
What is the finish of the downlight?
The finish is polished chrome.
Troubleshooting
Downlight doesn't turn on.
Check the power supply, ensure the bulb is properly installed and not burnt out, and verify the wiring connections.
Downlight flickers.
Check the bulb for loose connections, replace the bulb, or check for voltage fluctuations.
Water is entering the downlight.
Ensure the downlight is properly sealed, and that the IP65 rating is maintained during and after installation.
Pros and Cons
Pros
- Stylish polished chrome finish enhances the aesthetic of any room.
- IP65 rating allows for safe installation in bathrooms and kitchens.
- Fire-rated design ensures safety in various ceiling types.
- Easy loop-in/loop-out terminal block simplifies installation.
- Compatible with readily available GU10 bulbs.
- Durable die-cast aluminum construction
Cons
- GU10 bulb not included, requiring a separate purchase.
- Requires a 75mm cut-out, which may necessitate modifications to existing ceilings.
- Maximum wattage of 7W may limit brightness compared to other options.
- Requires professional electrical installation to meet safety standards and regulations.
Setup, Compatibility & Care
Setup:
- Ensure the power is switched off before installation.
- Cut a 75mm hole in the ceiling where the downlight will be installed.
- Connect the mains voltage wires to the loop-in/loop-out terminal block.
- Insert the downlight into the cut-out.
- Install the GU10 bulb (max 7W) into the downlight.
- Turn the power back on and test the downlight.
Compatibility:
- Compatible with GU10 bulbs.
- Suitable for use with mains voltage (240V).
- Compatible with fire-rated ceilings.
Care:
- Clean the downlight with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the downlight is installed and maintained by a qualified electrician to ensure safety and compliance with regulations.