Inner Tube 175/65R16 16 Inch Car Wheel Tyre - 29636-3
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This PetrolScooter inner tube is designed for car owners and maintenance professionals looking for a reliable replacement for 16-inch wheel assemblies. It provides a durable, puncture-resistant solution for various tyre sizes ranging from 175/16 to 215/16, ensuring consistent air pressure and performance. One caveat is that this tube is specifically designed for tube-type setups or emergency repair contexts; it is important to confirm your vehicle's wheel rim type is compatible with inner tubes before installation.
All features
| Model Part Number | 29636-3 |
|---|---|
| Brand | PetrolScooter |
Extended Product Information
FAQs
Can I use this in a tubeless tyre?
While it can fit inside a tubeless tyre in an emergency or for specific off-road needs, ensure your rim is designed to accept a valve stem and that the tyre casing is in good condition.
What is the valve type?
This tube uses a standard straight Schrader valve, which is the same type found on most passenger car tyres.
Is this tube suitable for high-speed motorway driving?
This tube is designed for standard vehicle maintenance; ensure it is properly installed and balanced by a professional if the vehicle is intended for high-speed highway use.
Does this come with a valve cap?
It is recommended to reuse your existing valve cap or purchase a standard replacement cap to protect the Schrader valve from road debris.
What if my tyre size isn't listed?
If your exact size is not within the range of 175 to 215, consult a professional, as using an incorrectly sized tube can lead to tube stretching, thinning, or premature failure.
Troubleshooting
Tube loses pressure rapidly after installation
Check for 'pinching' during the mounting process where the tube may have been trapped between the tyre bead and the rim.
Valve stem is crooked or tilted
Deflate the tube partially and reposition the tyre on the rim to ensure the valve stem is centered correctly in the rim hole.
Valve not holding air
Tighten the valve core using a valve core tool; if it continues to leak, the core may need to be replaced.
Pros and Cons
Pros
- Broad compatibility across multiple 16-inch tyre widths
- Uses a standard, easy-to-access Schrader valve
- High-quality, durable rubber construction
- Simple, straightforward installation process
Cons
- Not suitable for all modern tubeless-only wheel rims
- Requires tyre removal from the rim for proper installation
- Periodic manual pressure checks are necessary compared to some modern sensor-based systems
Setup, Compatibility & Care
Installation requires the removal of the tyre from the wheel rim using proper tyre levers or a professional mounting machine. Ensure the tube is lightly dusted with talcum powder before installation to prevent sticking to the inner tyre wall. For care, avoid exposing the tube to harsh chemical cleaners; use only mild soap and water if cleaning is required. Check the valve core for signs of leaks periodically, and always use a valve cap to keep debris out of the mechanism. Ensure the valve stem sits flush through the rim hole to prevent shearing or tearing during rotation.