Laser Tools Tyre Bead Depressor - 6131
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for mechanics and DIY enthusiasts working with tires. The Laser Tools Tyre Bead Depressor (6131) simplifies tire removal by securely holding the bead down, saving time and effort. While durable and universal, its effectiveness can vary on extremely stiff sidewalls.
All features
| Model Part Number | 6131 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What material is the Laser Tools Tyre Bead Depressor made from?
It is made from PA (Polyamide) with 30% fiber reinforcement for added strength and durability.
Is this tool suitable for all types of tires?
It is designed as a universal tyre changing tool and works with most standard car and light truck tires. However, its effectiveness may vary with extremely stiff sidewalls or specialized tires like run-flats.
What are the dimensions of the tool?
The dimensions are 130mm x 72mm x 160mm.
How much does the tool weigh?
The tool weighs approximately 290g.
How do I use the bead depressor?
Position the tool on the wheel rim so its depressing edge holds the tire bead down, allowing easier access for tire removal with levers.
Can this tool be used for installing tires as well?
While primarily designed for tire removal, it can potentially assist in tire installation by keeping one side of the bead accessible, though its main function is bead depression for removal.
How should I clean and maintain the tool?
Clean the tool with a damp cloth after each use and store it in a dry environment to maintain its condition.
Troubleshooting
Bead depressor not holding the bead effectively
Ensure the tool is positioned correctly on the rim and applying sufficient downward pressure. Try repositioning or using it in conjunction with another tool on a different section of the bead. Check for any obstructions on the rim or tire bead.
Tool feels like it's flexing or bending
Verify that the tire bead is properly seated and that you are not exceeding the tool's intended force limits. The PA and 30% fiber construction is robust, but excessive force can still stress the material. Ensure the tool is engaging the bead correctly and not slipping.
Difficulty fitting the tool onto the rim
This tool is designed for general compatibility. Ensure the rim edge is clean and free of debris. If a specific rim design presents an issue, you may need to experiment with placement or consider if the rim is outside standard specifications.
Pros and Cons
Pros
- Durable construction from PA and 30% fiber
- Universal fit for various tire types
- Aids significantly in tire bead removal
- Compact and lightweight for ease of use and storage
Cons
- May require significant force on very stiff sidewalls
- Effectiveness can depend on tire and rim combination
- Not suitable for run-flat tires without additional considerations
Setup, Compatibility & Care
Setup: No assembly is required. Simply position the tool on the wheel rim, ensuring the depressing edge is firmly against the tire bead.
Compatibility: This is a universal tyre changing tool, designed to work with most standard car and light truck tires. However, extremely stiff sidewalls or specialized tires (like run-flats) may present challenges where additional force or specialized techniques are needed.
Care: Clean the tool after each use with a damp cloth to remove dirt and grease. Store in a dry place to prevent material degradation. Avoid exposure to harsh chemicals.