DJI Osmo Flexible Adhesive Base Kit
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The DJI Osmo Flexible Adhesive Base Kit is an essential mounting solution for motorcycle and cycling enthusiasts looking to capture high-quality first-person perspective footage from a helmet. By providing a secure, curved surface mount, it allows users to attach their Osmo Action cameras directly to their gear for stable recording; however, users must ensure the application surface is clean and smooth, as it will not adhere reliably to porous, textured, or irregular materials.
All features
| Brand | DJI |
|---|
Extended Product Information
FAQs
Can I remove the adhesive base later?
Yes, but it is designed as a permanent mount. Removal may require heat and adhesive remover, and the adhesive will not be reusable once removed.
Which cameras are compatible?
It is compatible with Osmo Action 6, 5 Pro, 4, 3, 360, and Nano.
Do I need a separate adapter?
Depending on your specific camera model, you may need an Osmo Action Quick-Release Adapter Mount or a Dual-Direction Quick-Release Adapter Mount.
Can I use this on a matte-finish helmet?
Adhesion can be inconsistent on matte or rubberized finishes; it is recommended to test a small area or use on a glossy, smooth surface for best results.
How long does it take for the adhesive to set?
It is recommended to wait 24 hours after application before attaching the camera and taking it out for a ride.
Troubleshooting
The base is not sticking to the helmet surface
Ensure the surface was cleaned with alcohol and is completely dry. If the surface is textured or porous, the adhesive will not bond correctly.
Camera is wobbling during use
Check that the locking screw is tightened securely and ensure the Quick-Release Adapter Mount is fully seated in the base.
Pros and Cons
Pros
- Excellent for capturing immersive POV helmet footage
- Adhesive base is flexible enough to handle complex curves
- Highly durable under outdoor riding conditions
- Includes necessary mounting hardware to get started immediately
Cons
- Requires a clean, perfectly smooth surface for maximum adhesion
- May require additional Quick-Release Adapter Mounts depending on the camera model
- Not suitable for use on textured or porous helmet shells
- Single-use adhesive backing limits repositioning
Setup, Compatibility & Care
To set up the kit, identify a spot on your helmet that is smooth and free of scratches or wax. Wipe the area thoroughly with isopropyl alcohol and allow it to dry completely. Peel the backing off the adhesive, press firmly onto the helmet, and maintain pressure for 30 seconds. Allow at least 24 hours for the adhesive to fully cure before attaching the camera. Note that you may need an 'Osmo Action Quick-Release Adapter Mount' or 'Osmo Dual-Direction Quick-Release Adapter Mount' to connect your specific camera model. To maintain the mount, avoid exposing the adhesive to extreme chemical solvents and periodically check the integrity of the base before each ride.