Howard Sunshield Patio Furniture Wax - 473ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Howard Sunshield is for owners of indoor and outdoor wood furniture seeking to protect their pieces from sun damage and fading. Its key benefit is preserving wood color and finish, even in direct sunlight. A caveat is that regular application is necessary for optimal, continuous protection.
All features
| Model Part Number | SWAX16 |
|---|---|
| Brand | howard products |
Extended Product Information
FAQs
How often should I apply Howard Sunshield?
For indoor furniture, apply every 3-6 months, or as needed based on sun exposure. For outdoor furniture, reapplying every 3-6 months is recommended, especially after periods of intense sun or weather.
Can I use Sunshield on painted or stained wood?
Sunshield is primarily designed for natural wood finishes. While it may offer some protection on painted or stained surfaces, it is best to test in an inconspicuous area first. It is most effective on natural wood and wood finishes.
What is the difference between Sunshield and a regular wood polish?
Sunshield contains a specific UV inhibitor designed to block damaging UV rays, preventing wood color fading. Regular wood polishes typically clean and shine but do not offer this level of UV protection.
Does Sunshield protect against water damage?
Sunshield provides a layer of protection that can help repel some moisture, but its primary function is UV protection and conditioning. It is not a waterproof sealant and should not be relied upon for significant water protection.
Can Sunshield be used on wood floors?
Sunshield is intended for furniture and is not recommended for high-traffic areas like wood floors. It can leave a slippery residue that is not suitable for flooring.
Will Sunshield change the color of my wood?
Sunshield is designed to protect and enhance the natural beauty and depth of wood grain. It should not significantly alter the color, but rather help maintain its original tone by preventing fade.
Troubleshooting
White haze remains after buffing
Too much product was applied. Buff vigorously with a clean, dry cloth. If necessary, remove excess with a cloth dampened with mineral spirits and reapply a thinner coat.
Wood still appears faded
Ensure the product is applied regularly according to the recommended schedule. Check if the wood finish is severely damaged or if the fading is irreversible due to extreme past exposure.
Uneven sheen on the surface
Apply a more consistent, thin coat during application. Buff all areas thoroughly and uniformly.
Pros and Cons
Pros
- Effectively prevents sun fading on wood finishes.
- Enhances the natural beauty and depth of wood grain.
- Conditions teak and tropical hardwoods, preventing dryness and oxidization.
- Suitable for both indoor furniture exposed to sunlight and outdoor patio furniture.
- Contains natural ingredients like carnauba wax, beeswax, and orange oil.
Cons
- Requires regular application for continuous protection.
- May not be suitable for all wood finishes; always test in an inconspicuous area first.
- Does not offer protection against water damage or physical scratches.
Setup, Compatibility & Care
Application:
- Ensure the wood surface is clean, dry, and free from dust, dirt, or old finishes.
- Shake the container well before use.
- Apply a thin, even coat of Sunshield using a clean, soft cloth. Work the wax into the wood grain.
- Allow the wax to dry to a haze (approximately 10-15 minutes).
- Buff the surface with a clean, soft cloth to a desired sheen.
Compatibility:
Sunshield is designed for use on most indoor and outdoor wood finishes, including teak and other tropical hardwoods. It is safe for use on furniture that may be exposed to indirect or direct sunlight through windows. Always test on a small, inconspicuous area first to ensure compatibility with your specific wood type and finish.
Care:
- Store the container in a cool, dry place away from direct sunlight.
- Keep the container tightly sealed when not in use to preserve the product.
- For best results, reapply Sunshield every 3-6 months, depending on the level of sun exposure and environmental conditions.