Barrettine Protective Treatment - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Barrettine's Wood Protective Treatment is designed for outdoor timber structures like fences, sheds, and pergolas, offering excellent water repellency and UV protection. It penetrates rough, sawn, or smooth timber to reduce decay, swelling, and twisting, leaving a transparent finish that highlights the wood grain. However, it is not recommended for decking or garden furniture due to its limited rub resistance.
All features
| Colour | Black |
|---|---|
| Brand | Barrettine |
Extended Product Information
FAQs
Can I use Barrettine Wood Protective Treatment on decking?
No, this product is not ideal for decking or garden furniture due to its limited rub resistance. It is designed for less high-traffic timber structures.
How many coats of treatment should I apply?
Typically, one to two coats are recommended. For rough or sawn timber, you may need a more liberal application or an additional coat for adequate protection.
How long does the protection last?
The longevity of the protection depends on environmental exposure. Reapplication is usually needed every 1-3 years to maintain optimal performance.
Can I apply this over existing paint or varnish?
It is best applied to bare wood for optimal penetration and adhesion. If applying over an existing finish, ensure it is sound, well-adhered, and clean. Test in a small area first.
What is the finish like after application?
The treatment provides a transparent or translucent finish, allowing the natural grain and texture of the wood to remain visible.
How do I clean my application tools after use?
Clean your brushes, rollers, or sprayers with water immediately after you have finished applying the treatment.
Does this product protect against insects or mold?
The primary function of this treatment is water repellency and UV protection to prevent decay, swelling, and twisting. While a well-protected wood is less susceptible, specific insect or mold repellency is not its main feature.
Troubleshooting
Treatment not penetrating smooth timber effectively.
Ensure the timber surface is clean and dry. Lightly sanding very smooth surfaces may improve adhesion and penetration. Apply a second coat if necessary.
Uneven color or finish after application.
Ensure the product was stirred thoroughly before and during application. Apply coats evenly and avoid over-application in some areas. Work in consistent strokes.
Wood still shows signs of swelling or moisture.
Check if adequate coats were applied and if the product has fully cured. For severe issues, ensure the timber itself is not fundamentally compromised. Reapply the treatment.
Appearance is too dark or too translucent.
Test the treatment on an inconspicuous area first to gauge the final color. The final appearance can vary based on the type and condition of the wood. Consider a different color variant if the current one is not suitable.
Pros and Cons
Pros
- Effectively repels water, preventing rot and swelling.
- Protects wood from damaging UV rays, reducing color fading.
- Maintains the natural look of the wood with a transparent finish.
- Suitable for various outdoor timber structures.
- Helps prevent wood warping and twisting.
Cons
- Not suitable for decking or garden furniture due to low rub resistance.
- May require reapplication depending on exposure conditions.
- Limited color options compared to some other treatments (though black is available).
- The translucent finish might not be desired for all aesthetic preferences.
Setup, Compatibility & Care
Preparation: Ensure the timber surface is clean, dry, and free from dirt, grease, or existing finishes. For best results, apply to bare wood. If painting or treating over an existing finish, ensure it is well-adhered and clean.
Application: Apply one to two coats using a brush, roller, or sprayer. For rough or sawn timber, more liberal application may be needed. Allow adequate drying time between coats as per product instructions. Ensure good ventilation during application and drying.
Compatibility: This treatment is suitable for rough, sawn, or smooth timber. It is ideal for sheds, fences, trellis, pergolas, and timber gazebos. It is not recommended for decking or garden furniture.
Care: Reapply as needed, typically every 1-3 years, depending on the exposure of the timber to weather. Clean application tools with water immediately after use.