TekBox Monitor Mounts - Quad
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The TekBox Quad Monitor Mount is designed for professionals and power users looking to maximize desk space and boost productivity by mounting up to four monitors. It offers extensive adjustability for ergonomic viewing angles, though users must ensure their desk can support the combined weight and ensure monitor VESA compatibility. Key features include individual screen articulation, a wide range of screen sizes supported, and a durable steel construction.
All features
| Model Part Number | QUADSCREENMOUNT |
|---|---|
| Brand | TekBox |
Extended Product Information
FAQs
What is the maximum weight each monitor can be?
Each monitor arm can support a maximum weight of 8kg.
Does this mount come with VESA screws?
Yes, the mount typically includes a variety of VESA screws to fit common monitor back plates, but it's always recommended to check your monitor's manual for exact screw sizes.
Can I mount two monitors side-by-side and two above/below?
This specific quad mount is designed for side-by-side configuration on a single pole. For stacked configurations, you might need a different mount or adapters.
What are the dimensions of the mount?
The overall dimensions are approximately 92cm wide x 28cm deep x 91cm high, with each arm extending up to 46cm.
How do I switch a monitor between landscape and portrait mode?
Once the monitor is attached to the VESA plate, you can typically rotate it freely. Loosen the tilt and swivel mechanisms slightly, rotate the monitor, and then re-tighten to hold the desired orientation.
Is this mount suitable for curved monitors?
Yes, as long as the curved monitor fits within the supported size (13"-32") and VESA pattern (75x75mm or 100x100mm) and does not exceed the 8kg weight limit per screen.
Troubleshooting
Monitor arm is too stiff or too loose.
Use the provided Allen wrench to adjust the tension screw located on the arm mechanism. Turn clockwise to tighten (for stiffness) or counter-clockwise to loosen.
Mount feels unstable on the desk.
Ensure the desk clamp or grommet mount is securely fastened. Check that your desk surface is level and sturdy. Do not exceed the maximum weight capacity per arm.
Monitor not aligning correctly after adjustment.
Loosen the VESA plate screws slightly, align the monitor, and then retighten securely. Ensure the monitor is centered on the VESA plate.
One or more monitors sag after installation.
This indicates the arm's tension is set too low for the monitor's weight. Increase the tension on that specific arm until the monitor holds its position.
Pros and Cons
Pros
- Significantly increases desk space by mounting monitors overhead.
- Enhances productivity through multi-monitor setups.
- Highly customizable viewing angles with full articulation for each screen.
- Wide compatibility with VESA-mounted monitors within the specified size and weight limits.
- Durable build quality suitable for professional environments.
Cons
- Requires a sturdy desk capable of supporting the total weight of the mount and four monitors.
- Initial setup can be time-consuming due to the multiple adjustment points.
- May not be suitable for very large or unusually shaped monitors.
- The overall footprint, including cable management, can still be substantial.
Setup, Compatibility & Care
Setup:
- Desk Clamp/Grommet Mount: Securely attach the base pole to your desk using either the included clamp or the grommet mount (if applicable). Ensure it is tightened firmly.
- Attach Monitor Arms: Slide the individual monitor arms onto the main pole at your desired heights.
- Mount Monitors: Attach your monitors to the VESA plates (75x75mm or 100x100mm) on the arms using the provided screws. Ensure the monitor is securely fastened before proceeding.
- Adjust Tension: Use the included tools to adjust the tension of the arms for smooth, controlled movement and to support the weight of each monitor.
- Final Adjustments: Fine-tune the tilt, swivel, and rotation of each monitor for optimal viewing angles.
Compatibility:
- Monitor Size: 13 inches to 32 inches.
- VESA Patterns: 75x75mm and 100x100mm.
- Weight Capacity: Maximum 8kg per monitor.
- Desk Thickness: Ensure your desk thickness is compatible with the clamp or grommet mount.
Care:
- Cleaning: Wipe down the mount with a soft, dry or slightly damp cloth. Avoid abrasive cleaners.
- Maintenance: Periodically check that all screws and the base clamp are tight. Adjust arm tension if monitors begin to sag.