MoTip Pro PTFE Dry Spray - 500ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of MoTip Pro PTFE Dry Spray seeking to understand its application and benefits. It's ideal for those needing a dry lubricant for metal and plastic parts. The key benefit is reduced friction and wear without oily residue, but it's best suited for light loads and low speeds. This guide provides comprehensive information on features, usage, and care.
All features
| Model Part Number | M090201 |
|---|---|
| Brand | Motip |
Extended Product Information
FAQs
What materials is MoTip Pro PTFE Dry Spray compatible with?
It's compatible with most metals and plastics. However, it's always recommended to test on a small, inconspicuous area first.
Can this spray be used on rubber?
While it can be used on some rubber components, it's best to test on a small area first to ensure compatibility, as it may affect certain types of rubber.
How long does the lubrication last?
The duration of lubrication depends on the application, load, and environmental conditions. Reapplication may be required.
Is this spray safe for use in food processing environments?
No, this product is not suitable for food processing environments.
How should I store the spray?
Store the can in a cool, dry place, away from direct sunlight and heat sources.
What should I do if the nozzle clogs?
Try cleaning the nozzle with a solvent. If that doesn't work, replace the nozzle.
Can this spray be used on high-speed components?
No, it is designed for use on parts that are liable to light load and low speed.
Troubleshooting
Spray nozzle clogs.
Clean the nozzle with a solvent or replace it. Ensure the can is shaken well before each use.
Lubricant doesn't adhere properly.
Ensure the surface is completely clean and dry before application.
Squeaking continues after application.
Reapply the spray, ensuring even coverage. If the problem persists, the application may be inadequate or the load/speed exceeds the product's limits.
Pros and Cons
Pros
- Reduces friction and wear.
- Leaves no messy residue.
- Excellent adhesion.
- Resistant to weather.
- Versatile applications.
- Suitable for use as a mold release agent.
Cons
- Not suitable for heavy loads.
- Limited to low-speed applications.
- May require reapplication depending on usage.
- Not ideal for environments with extreme temperatures.
- Specific to metal and plastic parts.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean and free from any existing grease, oil, or dirt. Use a degreaser if necessary.
- Application: Shake the can well before use. Apply a thin, even layer of the spray from a distance of approximately 20-30 cm.
- Drying Time: Allow the spray to dry completely before using the treated parts. Drying time can vary, but generally, it's a few minutes.
- Compatibility: Compatible with most metals and plastics. Always test on a small, inconspicuous area first, especially on sensitive materials.
- Storage: Store the can in a cool, dry place, away from direct sunlight and heat sources.
- Care: Avoid excessive application. Reapply as needed, depending on the use and environmental conditions. Clean nozzles after use to prevent clogging.