Proclad Aquabord PVC Shower Panel - White Sparkle
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Proclad Aquabord PVC Shower Panel in White Sparkle is designed for homeowners and DIY enthusiasts looking to quickly and easily upgrade their shower or bathroom walls. Its key benefit is providing a 100% waterproof, hygienic, and low-maintenance surface without the need for grout. A potential caveat is that moderate DIY skills are recommended for optimal installation.
All features
| Model Part Number | Aquabord |
|---|---|
| Brand | Proclad |
Extended Product Information
FAQs
Are these panels suitable for a ceiling?
These panels are primarily designed for walls in wet areas. While they can be used on ceilings in specific applications, ensure they are adequately supported and installed according to best practices for ceiling panels in moisture-prone environments.
Do I need to use adhesive with the tongue and groove system?
Yes, while the tongue and groove provides a mechanical lock, a suitable waterproof adhesive is generally required to securely fix the panels to the wall and ensure a watertight seal.
Can I install these panels over existing tiles?
It is generally recommended to remove existing tiles for a solid and flat substrate. If installing over tiles is attempted, ensure the surface is perfectly flat, clean, and dry, and use an adhesive specifically designed for this purpose, though results may vary.
How do I cut holes for pipes or light fixtures?
Use a sharp utility knife, jigsaw, or a hole saw appropriate for PVC. Measure carefully and make precise cuts. Smooth any rough edges with fine-grit sandpaper.
What is the expected lifespan of these panels?
When installed correctly in a suitable environment and maintained according to care instructions, Proclad Aquabord panels are designed for long-term use, offering a durable and waterproof solution for many years.
Can I paint these panels?
These panels are finished with a specific decorative surface and are not designed to be painted. Painting may affect the waterproof properties and the finish.
Troubleshooting
Panels not interlocking smoothly
Ensure there is no debris in the tongue or groove. Check that panels are aligned correctly and not warped. A gentle tap may help them slot together.
Adhesive not holding panels securely
Verify that the wall surface is dry and free from dust or grease. Use a high-quality, waterproof adhesive specifically designed for PVC panels. Ensure adequate drying time is allowed as per adhesive instructions.
Water ingress at edges or corners
Ensure all external edges and corners are properly sealed with a suitable bathroom-grade silicone sealant. Check for any gaps and reapply sealant if necessary.
Surface appears dull or scratched
Avoid abrasive cleaning products. For minor scratches, a plastic polish may be used cautiously, but always test in an inconspicuous area first. Regular cleaning with a damp cloth should maintain the finish.
Pros and Cons
Pros
- Creates a 100% waterproof and hygienic surface.
- Eliminates the need for grout and sealant in joints.
- Easy to clean and maintain with a simple damp cloth.
- Lightweight and simple to install for DIYers.
- Durable and resistant to cracks and chips.
- Offers a seamless, modern aesthetic.
Cons
- Requires moderate DIY skills for best results.
- May not be suitable for extremely high-impact areas without additional protection.
- The hollow core could be a consideration for sound insulation.
- Requires precise cutting for outlets and fixtures.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the wall surface is clean, dry, and structurally sound before installation.
- Measure and cut panels as needed using appropriate tools for PVC.
- Apply a suitable waterproof adhesive to the wall or the back of the panel, following adhesive manufacturer's instructions.
- Slide the tongue of one panel into the groove of the next, ensuring a tight fit.
- Secure panels to the wall as per adhesive recommendations or by using mechanical fixings if required by the specific installation scenario.
- Seal any external corners or edges with appropriate bathroom-grade sealant.
Compatibility:
- These panels are designed for interior use in wet areas such as bathrooms and shower enclosures.
- They are compatible with standard bathroom fixtures and fittings.
- Ensure compatibility with any existing wall structures and ensure adequate ventilation in the room.
Care:
- Clean the panels regularly using a soft, damp cloth.
- Avoid using abrasive cleaners, solvents, or scouring pads, as they can damage the surface.
- Wipe up any spills or condensation promptly.