UHU Endfest Plus 300 - Two Component Adhesives - 15ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a reliable adhesive for small-scale projects. UHU Endfest Plus 300 offers powerful, solvent-free bonding across various materials. While it excels in many applications, avoid using it on large glass surfaces or specific plastics. This two-component epoxy resin adhesive provides a robust, impact-resistant bond, perfect for those needing lasting adhesion.
All features
| Model Part Number | UH45640 |
|---|---|
| Brand | UHU |
Extended Product Information
FAQs
What materials can I use UHU Endfest Plus 300 on?
You can use it on glass, porcelain, ceramic, wood, marble, stone, concrete, and Styrofoam.
Is UHU Endfest Plus 300 waterproof?
Yes, it is water-resistant, making it suitable for applications where moisture is present.
How long does it take for the adhesive to fully cure?
It takes approximately 12 to 24 hours to fully harden at room temperature.
Can I use this on large glass surfaces?
No, it is not recommended for large glass surfaces.
What is the mixing ratio for UHU Endfest Plus 300?
The mixing ratio is 1:1 by volume.
Is UHU Endfest Plus 300 suitable for outdoor use?
Yes, due to its resistance to moisture and aging, it can be used outdoors.
What should I do if the adhesive gets on my skin?
Rinse immediately with plenty of water and seek medical advice if irritation occurs.
Where is the product manufactured?
This product is made in Germany.
Troubleshooting
Bonding fails or is weak.
Ensure surfaces are clean, dry, and free of grease. Mix the components thoroughly in a 1:1 ratio. Allow sufficient curing time at room temperature.
Adhesive doesn't cure properly.
Verify the expiration date. Ensure the components were mixed thoroughly. Maintain the correct room temperature during curing.
Adhesive is too thick or difficult to apply.
Ensure the product is stored at room temperature before use. If the problem persists, the product may be expired.
Pros and Cons
Pros
- Creates a strong, long-lasting bond.
- Suitable for a wide range of materials.
- Resistant to aging and moisture.
- Easy to use with the included accessories.
- Solvent-free formula, making it safer to use.
Cons
- Not suitable for large glass surfaces.
- Not recommended for use on PE or PP plastics.
- Requires precise 1:1 mixing ratio.
- Setting time of 90 minutes and full cure can take up to 24 hours.
- Surface must be clean, dry, and free of grease and dust for optimal results.
Setup, Compatibility & Care
Setup
- Preparation: Ensure the surfaces to be bonded are clean, dry, and free of dust and grease.
- Mixing: Dispense equal parts of both components onto the mixing tray provided. Mix thoroughly using the spatula until a uniform mixture is achieved.
- Application: Apply the mixed adhesive to both surfaces. Assemble the parts and hold them together without applying pressure.
- Curing: Allow the adhesive to set for approximately 90 minutes. Full hardening occurs between 12-24 hours at room temperature. Setting time depends on final strength and temperature.
Compatibility
UHU Endfest Plus 300 is compatible with: glass, porcelain, ceramic, wood, marble, stone, concrete, and Styrofoam.
Care
- Store in a cool, dry place.
- Keep out of reach of children.
- Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice.