Bond It superglue ACTIVATOR Accelerator Adhesive Glue Instant Super - 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Bond It superglue ACTIVATOR, helping you understand how to maximize its effectiveness. It's designed to accelerate the curing of cyanoacrylate adhesives, improve bonding, and prevent adhesive penetration, making it ideal for various materials. Note that while it significantly speeds up curing, the final bond strength depends on proper surface preparation.
All features
| Model Part Number | BIC400 |
|---|---|
| Brand | Bond it |
Extended Product Information
FAQs
How do I apply the activator?
Apply a light, even coat of the activator to one surface before applying superglue to the other. Then, bring the surfaces together immediately.
What materials is it suitable for?
It is ideal for use on MDF, rubber, uPVC, and many other materials.
Do I need to clean the surfaces before applying?
Yes, always clean the surfaces to be bonded, removing any dust, grease, or contaminants.
What should I do if the bond fails?
Ensure the surfaces were prepared correctly. If the bond continues to fail, try a different type of superglue.
Is it safe to use?
Use in a well-ventilated area and avoid inhaling the spray. Follow the safety instructions on the product label.
How should I store the Bond It Superglue Activator?
Store in a cool, dry place away from direct sunlight.
Troubleshooting
Glue is not curing quickly.
Ensure the activator is fresh and properly applied. Make sure you are using the correct type of superglue.
Bond is weak or fails.
Ensure surfaces were properly cleaned and prepared before application.
Pros and Cons
Pros
- Speeds up the curing process dramatically.
- Improves bond strength on challenging surfaces.
- Prevents adhesive from being absorbed into porous materials, ensuring a stronger bond.
- Easy to apply with the aerosol format.
- Suitable for a wide range of materials.
Cons
- May require a well-ventilated area due to aerosol application.
- Effectiveness depends on proper surface preparation.
- The product is specifically designed for use with cyanoacrylate adhesives, limiting its versatility.
- Not suitable for use on all materials; always test on an inconspicuous area first.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free of dust or grease. For best results, lightly roughen the surfaces.
- Application: Apply the activator to one surface. Apply the superglue to the other surface. Quickly bring the surfaces together.
- Compatibility: This activator is specifically designed for use with cyanoacrylate adhesives. Check the superglue packaging for compatibility.
- Care: Store the aerosol in a cool, dry place. Avoid direct sunlight. Always test on an inconspicuous area before full application. Use in a well-ventilated area.