Aquacadabra PVC Cement - 473ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Aquacadabra PVC Cement is a high-performance, medium-bodied adhesive specifically engineered for DIY plumbing, irrigation, and pool and spa repair projects. This fast-setting, low VOC formula is ideal for professionals and homeowners who need to achieve a durable, water-tight bond quickly, even in wet environments. While it excels in speed and versatility, users should note that careful pipe preparation is essential for a reliable seal, and it may not be suitable for all high-pressure applications depending on local building codes.
All features
| Brand | JB Weld |
|---|
Extended Product Information
FAQs
Can I use this on CPVC pipes?
No, this product is specifically formulated for PVC and should not be used on CPVC or metal piping systems.
Do I always need to use a primer?
Primer is recommended for all pressure applications. It may be omitted on non-pressure systems, provided your local plumbing codes allow it.
What is the maximum diameter this cement can handle?
It is suitable for all classes and schedules up to 6 inches, and specifically Schedule 80 pipe up to 4 inches.
How long should I wait before pressurizing the pipe?
Due to its fast-setting nature, it allows for quicker pressurization, but always refer to the specific set and cure time instructions on the container based on temperature and pipe size.
Is this cement waterproof?
Yes, it is designed for use in wet conditions, making it an excellent choice for pool, spa, and irrigation applications.
What is the best way to clean up spills?
Wet cement can be wiped away with a clean cloth. Once cured, it is extremely difficult to remove, so wipe off excess material from pipe surfaces immediately.
Troubleshooting
Cement has become too thick or gelatinous
The solvent has evaporated due to the container being left open. If significant thickening has occurred, the product should be replaced for safety and effectiveness.
Joint leaked upon pressurization
Check if the joint was fully seated or if the setup time was insufficient. Ensure surfaces were cleaned of debris prior to application.
Bond feels weak or brittle
Ensure the pipe ends were properly de-burred and that the correct amount of cement was applied to create a uniform seal.
Pros and Cons
Pros
- Extremely fast cure time for rapid project turnaround
- Effective in wet conditions common in pool and irrigation work
- Versatile range of pipe size compatibility
- Low VOC formulation meets safety standards
Cons
- Not suitable for extremely high-pressure systems beyond specified limits
- Fast-setting nature requires quick and accurate alignment during installation
- Requires adherence to local codes regarding primer-less application
Setup, Compatibility & Care
To ensure the strongest bond, cut the pipe square and remove all burrs from the ends. Use an appropriate cleaner to remove dirt and oils. If your local code requires primer for pressure applications, apply it to both the pipe and fitting before applying the Aquacadabra PVC Cement. Always store the container in a cool, dry place with the lid tightly secured to prevent the solvent from evaporating, which can thicken the adhesive and reduce its effectiveness. Work in a well-ventilated area to avoid prolonged inhalation of vapors.