Aurora Lighting Fixed Fire Rated GU10 Downlight - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and contractors looking to install the Aurora Lighting Fixed Fire Rated GU10 Downlight. This downlight provides safe and efficient lighting, meeting building regulations with its fire-rated design. Note that the light fixture itself does not include the GU10 lamp, which must be purchased separately.
All features
| Colour | White |
|---|---|
| Model Part Number | EN-FD101W |
| Brand | Aurora Lighting |
Extended Product Information
FAQs
What is the fire rating of this downlight?
It has a 30, 60, and 90-minute fire rating.
What type of lamp does this downlight use?
It uses GU10 lamps. The lamp is not included with the fixture.
What are the dimensions of the downlight?
The diameter is 87mm, the depth is 110mm, and the cut-out size is 75mm.
Is this downlight suitable for bathrooms?
The product is IP20 rated. While it can be installed in bathrooms, it's essential to consider the specific zone requirements of your bathroom and ensure compliance with electrical safety regulations.
How do I install the lamp?
Insert the GU10 lamp into the fixture and secure it using the twist and lock retaining ring.
Can I use LED lamps with this downlight?
Yes, it is compatible with LED GU10 lamps, such as the Enlite LED 5W lamps.
Where can I find the correct replacement lamps?
You can find compatible lamps using the codes provided in the product description. The Enlite LED 5 W 500 lm warm white lamp (code 80549) or the Enlite LED 5 W 520 lm cool white lamp (code 59250).
Troubleshooting
Light does not turn on.
Check the power supply and ensure the wiring is correctly connected. Verify that the lamp is properly installed.
Lamp flickers.
Check the lamp connection. Replace the lamp if necessary. Ensure the lamp is compatible with the fixture.
Pros and Cons
Pros
- Fire-rated for safety and compliance.
- Easy to install with the twist and lock design.
- Loop-in/loop-out terminal block simplifies wiring in series.
- Compatible with a wide range of GU10 lamps.
Cons
- GU10 lamp is not included and must be purchased separately.
- Requires a 75mm cutout which may require modifications to the ceiling.
Setup, Compatibility & Care
Setup
- Cut-Out: Create a 75mm diameter hole in the ceiling.
- Wiring: Use the loop-in/loop-out terminal block to connect the downlight to the power supply.
- Installation: Insert the downlight into the cut-out and secure it.
- Lamp Insertion: Install the GU10 lamp (sold separately) into the fixture and secure it with the twist and lock ring.
Compatibility
- Lamps: Compatible with GU10 lamps, including the Enlite LED 5W 500lm warm white lamp (code 80549) and the Enlite LED 5W 520lm cool white lamp (code 59250).
- Ceiling Types: Suitable for installation in various ceiling materials, ensuring they meet fire safety regulations.
Care
- Cleaning: Use a dry cloth to clean the downlight.
- Safety: Always switch off the power supply before cleaning or replacing the lamp.