Hotpoint 60cm Chimney Cooker Hood - Silver



Currently unavailable



Currently unavailable
This guide is for anyone looking to understand and effectively use the Hotpoint 60cm Chimney Cooker Hood. It offers powerful extraction, stylish design, and energy-efficient lighting, making it a valuable addition to any kitchen. Keep in mind that while it offers effective odour removal, it requires occasional filter maintenance.
| Colour | Silver |
|---|---|
| Energy Efficiency | D |
| Model Part Number | 869991652160 |
| Brand | Hotpoint |
The aluminium grease filter is dishwasher safe. Remove the filter and place it in the dishwasher. Alternatively, you can wash it by hand with warm, soapy water.
Charcoal filters should be replaced every 3-6 months, depending on your cooking frequency.
Yes, this hood can be used in recirculating mode by installing charcoal filters.
The hood uses LED light bulbs, which are energy-efficient and long-lasting.
Refer to the user manual for instructions on replacing the LED light bulbs. Ensure the appliance is switched off and unplugged before changing the bulbs.
The maximum extraction power is 415 m³/h.
The noise level is 62 dB on high speed and 53 dB on low speed.
Check the power supply and ensure the unit is properly plugged in. Check the circuit breaker.
Clean or replace the grease filter. Check and replace the charcoal filters. Ensure proper ducting (if applicable).
Check the light bulbs and replace if necessary. Make sure the light switch is turned on.
Check if the fan blades are obstructed. Ensure the unit is properly mounted and secure. Reduce the fan speed.