Tetrosyl Cartridge Car Body Seam Sealer Sealant - Synthetic Rubber Based - 310mlx12
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tetrosyl Cartridge Car Body Seam Sealer Sealant is designed for automotive professionals and DIY enthusiasts seeking to protect car body overlap seams from dust and water. Its key benefit is providing a permanently flexible, non-slumping seal that ensures long-lasting protection. A minor caveat is its moisture-curing nature, requiring specific storage conditions. This synthetic rubber-based sealant offers excellent adhesion and can be overcoated with various paint systems once cured.
All features
| Model Part Number | TETCSS310PK12 |
|---|---|
| Brand | Tetrosyl |
Extended Product Information
FAQs
How long does it take for the sealant to dry?
The Tetrosyl Cartridge Seam Sealer dries in approximately 2 hours at 20°C (68°F).
Can I paint over the seam sealer?
Yes, once fully cured, the sealant can be overcoated with nitro-cellulose, acrylic, or compliant refinishing paint systems.
What is the best way to store partially used cartridges?
Leave a bead of material protruding from the nozzle. This bead will cure and seal the nozzle. Remove this cured bead before the next use.
Is this sealant suitable for exterior body panels exposed to direct weather?
Yes, it is designed to protect overlap seams against dust and water penetration, making it suitable for exterior automotive bodywork.
What makes this sealant 'non-slumping'?
Non-slumping means the sealant will hold its shape and not sag or run down when applied, making it ideal for both horizontal and vertical joints.
What is the shelf life of this product?
As a moisture-curing product, it should be stored in a cool, dry place. While specific shelf life is not detailed, proper storage is crucial for maintaining its efficacy. Check the product packaging for any date codes.
Troubleshooting
Sealant is difficult to dispense.
Ensure the cartridge is correctly loaded into the caulking gun and that the nozzle is cut to an appropriate size. Check for any blockages within the nozzle.
Sealant is not adhering properly.
Ensure the surfaces to be sealed are clean, dry, and free from grease or contaminants. For best results, surfaces should be prepared according to automotive refinishing standards.
Sealant is sagging on vertical surfaces.
While designed to be non-slumping, ensure the ambient temperature is within the recommended application range. Excessive heat can sometimes affect consistency.
Sealant will not cure.
Ensure the product is within its shelf life and has been stored correctly. Excessive humidity or very low temperatures can slow or inhibit the moisture-curing process.
Pros and Cons
Pros
- Offers excellent protection against dust and water penetration.
- Maintains flexibility over time, preventing seal failure due to movement.
- Stays in place during application, suitable for various joint orientations.
- Can be painted over for aesthetic integration with the vehicle's finish.
- Simple to apply with a standard caulking gun.
Cons
- Requires careful storage in a cool, dry place due to moisture-curing properties.
- Curing time of 2 hours means a waiting period before overcoating.
- Requires removal of a cured bead from the nozzle if not used entirely at once, adding a maintenance step.
- Primarily designed for automotive seams; may not be suitable for all general-purpose sealing tasks.
Setup, Compatibility & Care Instructions
Setup:
- Remove the plastic nozzle extension from the cartridge.
- Push the internal nozzle seal inwards.
- Cut the nozzle extension to the desired bead size and re-attach it.
- Punch and remove the bottom seal of the cartridge.
- Load the cartridge into a standard caulking gun.
Compatibility:
- Compatible with standard caulking guns.
- Can be overcoated with nitro-cellulose, acrylic, or compliant refinishing paint systems after full cure.
Care:
- If not using the entire cartridge at once, leave a bead of material protruding from the nozzle. This bead will cure and can be removed before the next application.
- Store unused cartridges in a cool, dry place to maintain product integrity, as it is a moisture-curing product.