Amelie IP44 Flush Polished Chrome Ceiling Light - Pagazzi - Silver

Currently unavailable

Currently unavailable
This guide is for homeowners seeking a stylish and space-saving lighting solution, particularly for rooms with lower ceilings. The Amelie ceiling light offers a dimmable, IP44-rated polished chrome finish with a clear glass shade, providing a classic touch without sacrificing headroom. While it enhances ambiance and design, note that the G9 bulb is not included and requires a separate purchase.
| Colour | Silver |
|---|---|
| Model Part Number | Ple2148 |
| Brand | Pagazzi |
The Amelie light uses one G9 capsule light bulb, with a maximum wattage of 40W. Please note that the bulb is not included.
Yes, the Amelie light is IP44 rated, which means it is protected against splashes of water, making it suitable for bathroom installations.
You can use any G9 capsule bulb up to a maximum of 40W. For dimming functionality, ensure you use a dimmable G9 bulb.
Wipe the polished chrome with a soft, dry or slightly damp cloth. Avoid abrasive cleaners.
Yes, the Amelie light is dimmable, provided you install a dimmable G9 bulb and are using a compatible dimmer switch.
The light has a projection of 17.8cm from the ceiling and a diameter of 14cm.
Information regarding warranty is typically provided by the retailer. Please check with your point of purchase for warranty details.
Check that the power supply is on. Ensure the G9 bulb is correctly inserted and is not burnt out. Verify all wiring connections are secure.
This could indicate a loose bulb connection or a faulty bulb. Try re-seating the bulb or replacing it with a new one. If the issue persists, check dimmer switch compatibility or wiring.
Ensure you are using a compatible dimmable G9 bulb. Check the wiring to the dimmer switch and confirm the switch itself is functioning correctly.
Gently check how the glass shade is secured (e.g., screw thread, clips) and ensure it is tightened appropriately without over-tightening.
Setup: The Amelie ceiling light is designed for flush mounting. Ensure the power is switched off at the mains before installation. The light fixture should be securely attached to the ceiling using appropriate fixings (not included). The clear glass shade attaches to the base, usually with a screw-thread or clip mechanism.
Compatibility: This light requires one G9 capsule light bulb with a maximum wattage of 40W. It is compatible with dimmable bulbs, allowing for adjustable brightness. Please ensure the replacement bulb fits the G9 socket and does not exceed the maximum wattage.
Care: To clean the light, first ensure it is switched off and cool. Gently wipe the polished chrome base with a soft, dry or slightly damp cloth. The clear glass shade can be removed for more thorough cleaning with a glass cleaner and a soft cloth. Avoid using abrasive cleaners or scouring pads that could damage the finish.