Solvent Cement - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using FloPlast Solvent Cement - White to create watertight joints in PVC and ABS soil and waste pipe systems. The primary benefit of this product is its ability to form permanent, leak-proof connections. However, it's crucial to work in a well-ventilated area and follow all safety precautions to avoid potential hazards.
All features
| Colour | White |
|---|---|
| Brand | FloPlast |
Extended Product Information
FAQs
How long does it take for the solvent cement to set?
The joint should be left for 5 minutes to set before handling. However, wait 12 hours before testing the installation.
Can I use this cement with other types of plastic pipes?
No, this solvent cement is specifically designed for use with PVC and ABS soil and waste pipes.
What safety precautions should I take when using solvent cement?
Work in a well-ventilated area. Avoid skin contact; use gloves if possible. If contact occurs, wash thoroughly with soap and water. Keep away from heat sources and naked flames.
How should I store the solvent cement?
Store in a cool place, away from heat sources, and out of the reach of children.
What happens if I get solvent cement on my skin?
Wash the affected area thoroughly with soap and water.
Can solvent weld joints be undone?
No, solvent weld joints are permanent and cannot be disassembled once the joint has been made.
What's the shelf life of the solvent cement?
The shelf life can vary, so always check the expiry date on the container.
Troubleshooting
Joint is leaking after setup.
Ensure the pipe was fully inserted into the fitting with cement applied to both surfaces. Allow sufficient setting time (12 hours) before testing. If the leak persists, the joint may need to be cut out and redone.
Cement appears thick or clumpy.
Ensure the product is within its expiry date. If it's old, it may have degraded and should be replaced. Also, ensure the container is properly sealed when not in use.
Joint is weak or breaks easily.
Make sure that the surfaces were clean before applying the cement, and that sufficient cement was applied to both surfaces. Allow the recommended setting time. Consider if the pipes and fittings are compatible with the cement.
Pros and Cons
Pros
- Creates permanent, watertight seals.
- Easy to apply, saving time and effort.
- Specifically designed for use with PVC and ABS pipes.
- Provides a strong and durable joint.
- White color for aesthetic matching with white pipes and fittings.
Cons
- Solvent weld joints are permanent and cannot be disassembled.
- Requires proper ventilation during use.
- Contact with skin should be avoided; gloves are recommended.
- Must be stored in a cool place, away from heat and flames.
- Setting time must be observed before testing the joint.
Setup, Compatibility & Care
- Preparation: Ensure the outer wall of the pipe and the inner wall of the fitting are clean and free from any debris.
- Application: Apply solvent cement evenly to both surfaces.
- Assembly: Immediately push the pipe fully into the fitting and give it a slight twist to ensure good contact.
- Cleaning: Remove any excess cement with a damp cloth.
- Setting: Allow the joint to set for 5 minutes before handling.
- Testing: Wait 12 hours before testing the installation for leaks.
*Compatibility: Only for PVC and ABS soil and waste pipes.*
*Care:* Store in a cool place, away from heat sources and out of reach of children. Always work in a well-ventilated area and avoid skin contact. If contact occurs, wash thoroughly with soap and water.