Sealey Deep Impact Socket - 1/2" Drive - 18.5mm 19.5mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Sealey SX1819 Deep Impact Socket, a double-ended socket designed for removing wheel bolts and nuts. The key benefit is its ability to easily remove damaged or capped nuts, saving you time and effort. However, note that it's specifically designed for certain vehicle types. This guide provides essential information on the socket's features, usage, and maintenance to ensure optimal performance.
All features
| Model Part Number | SX1819 |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
What size drive is this socket?
The Sealey SX1819 has a 1/2" square drive.
What vehicles is this socket designed for?
It is designed for Ford, GM, Jeep, and Chrysler vehicles.
What is the socket's depth?
The socket is 80mm deep.
What is the benefit of the thin-wall design?
The thin-wall design allows the socket to fit into confined spaces and work with various applications.
How do I maintain the socket?
Clean after each use, store in a dry place, and inspect regularly. Lightly oil to prevent rust.
What is the finish on the socket?
It has a black phosphate finish.
What should I do if the socket doesn't fit the nut?
Double-check the nut size and ensure the socket is fully seated. Verify vehicle compatibility.
Can I use this socket with a breaker bar?
While it can be used with a breaker bar, it is optimized for use with an impact wrench.
Troubleshooting
Socket won't fit the nut.
Ensure you are using the correct size (18.5mm or 19.5mm) for the wheel nut. Verify that the socket is compatible with your vehicle's make and model.
Socket slips or damages the nut.
Make sure the socket is fully seated on the nut before applying force. Avoid using excessive force, and check for any obstructions that might prevent a firm grip.
Socket rusts or corrodes.
Clean the socket after each use to remove debris. Store the socket in a dry place. Lightly oil the socket periodically to prevent rust. Replace if significant corrosion is present.
Pros and Cons
Pros
- Double-ended design offers flexibility for different nut sizes.
- Deep socket allows access to nuts in tight spaces.
- Thin-wall design increases compatibility with various applications.
- Durable construction ensures long-lasting performance.
- Black phosphate finish protects against corrosion.
Cons
- Limited to 1/2" square drive.
- Specific to certain vehicle makes and models.
- May not fit all wheel nut designs.
- Requires an impact wrench for optimal use.
Setup, Compatibility & Care
- Attachment: Attach the Sealey SX1819 to a 1/2" square drive impact wrench.
- Selection: Choose the correct end (18.5mm or 19.5mm) based on the wheel nut size.
- Application: Position the socket over the nut, ensuring a firm grip.
- Removal/Installation: Use the impact wrench to loosen or tighten the nut.
*Compatibility*: The SX1819 is compatible with Ford, GM, Jeep, and Chrysler vehicles. Always verify the correct nut size before use.
*Care*: After each use, clean the socket to remove any debris. Store in a dry place. Regularly inspect for wear and tear, and replace if necessary. The black phosphate finish helps protect against rust, but occasional cleaning and light oiling can prolong its life.