Splash Inflatable Paddling Pool - 8.5Ft, Lightweight, Durable, Easy Inflation & Drainage

Not Available Splash Inflatable Paddling Pool - 8.5Ft, Lightweight, Durable, Easy Inflation & Drainage

Get ready for endless summer fun with the Splash! Sunburst Inflatable Paddling Pool! This spacious...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Splash! Sunburst Inflatable Paddling Pool is designed for families seeking a simple and durable way to enjoy water play in their backyard. Its key benefit is providing a refreshing oasis for both children and adults to beat the summer heat. A minor caveat is that it requires a separate pump for inflation, which is not included.

All features

Brand	Splash

Extended Product Information

FAQs

What type of pump do I need for inflation?

You can use any standard electric, foot, or hand air pump. Please note that a pump is not included with the pool.

How long does it take to set up?

With a suitable air pump, the Splash! Sunburst Inflatable Paddling Pool can be inflated and ready for filling in approximately ten minutes.

What is the recommended fill level?

It is recommended to fill the pool to approximately 80% capacity to ensure the walls are adequately supported and to prolong the life of the pool.

Can adults use this pool?

Yes, the pool is designed to be durable and stable enough for both children and adults to enjoy. The larger sizes are particularly suitable for adults.

How do I clean the pool?

Use a damp cloth with mild soap to clean the pool. Avoid using abrasive cleaners, as they can damage the material. Always rinse thoroughly and allow it to dry completely before storing.

What should I do if the pool gets a small tear?

The pool comes with two 5x5cm repair patches. Clean and dry the damaged area thoroughly, then apply the patch firmly according to standard patch instructions.

What are the different sizes available and their capacities?

The Splash! Sunburst Inflatable Paddling Pool is available in three sizes: 6.5ft (approx. 440L), 8.5ft (approx. 780L), and 10ft (approx. 1075L). All pools have a wall height of 50cm.

Troubleshooting

Pool is not holding air or deflates quickly.

Check all inflation valves for a secure seal. Inspect the pool walls and seams for any punctures. Use the included repair patches for small holes.

Difficulty inflating the pool.

Ensure the air pump is correctly attached to the valve. Try a different type of pump (e.g., electric instead of manual) if available. Make sure the valve is open correctly.

Water is not draining properly.

Ensure the drainage plug is fully removed. If using the hose adaptor, check that the hose is securely connected and not kinked. Make sure the pool is on a level surface to allow water to flow to the drain.

Pool appears unstable or sides are bulging excessively.

Ensure the pool is inflated to the correct pressure (firm but not rock-hard). Verify that the pool is filled to the recommended 80% capacity. Check that the pool is on a completely level surface.

Pros and Cons

Pros

Durable and puncture-resistant material for long-lasting use.
Easy and quick setup process, minimizing waiting time.
Stable construction suitable for energetic play by both kids and adults.
Convenient features like a hose adaptor for easy filling and a simple drainage plug.
Available in multiple sizes to accommodate different garden dimensions.
Includes repair patches for minor damages.

Cons

Requires a separate air pump for inflation (not included).
While durable, it can still be punctured by sharp objects.
Water capacity varies by size, so check suitability for intended use.
Best suited for outdoor use on a level surface; not intended for permanent installation.

Setup, Compatibility & Care

Setup:

Choose a flat, level outdoor surface, free from sharp objects like stones or twigs. Ensure there's adequate space around the pool.
Unpack the pool and spread it out.
Locate the inflation valve(s). Use an electric, foot, or hand pump (sold separately) to inflate the pool. Do not over-inflate.
Connect a garden hose or filter pump to the convenient hose adaptor for filling. Fill to approximately 80% capacity, as recommended for optimal wall support.

Compatibility:

Compatible with standard electric, foot, and hand air pumps.
Hose adaptor is compatible with most standard garden hoses and filter pumps.

Care:

After use, drain the pool using the built-in plug or hose adaptor.
Clean the pool with a damp cloth and mild soap. Avoid abrasive cleaners.
Allow the pool to dry completely before storing to prevent mold and mildew.
Store in a cool, dry place, away from direct sunlight and sharp objects.
Use the included repair patches for any small punctures. Ensure the area is clean and dry before applying.