Axis C1410 Mk II - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The AXIS C1410 Mk II is a smart, easy-to-integrate speaker designed for clear communication in various environments, ideal for intercom systems. Its key benefit is wide-area audio coverage with a built-in amplifier, reducing the need for additional equipment. A potential consideration is that it requires a wired IP network connection. Key features include an all-in-one design, two-way audio support, and compatibility with existing video management software.
All features
| Colour | White |
|---|---|
| Series | C1410 Mk II |
| Model Part Number | 02838-001 |
| Brand | Axis |
Extended Product Information
FAQs
What is the frequency range of the speaker?
The speaker has a frequency range of 100 - 20000 Hz.
Does the speaker support Bluetooth?
No, the AXIS C1410 Mk II does not support Bluetooth.
What is the power consumption of the speaker?
The typical power consumption is 12.95 W.
Can I use this speaker outdoors?
No, the speaker is designed for indoor use only. It has an IP40 rating.
What is the amplifier output power?
The amplifier output power is 7 W.
What audio formats does the speaker support?
The speaker supports AAC-LC, G.711, G.726, and WAV audio formats.
What is the operating temperature range?
The operating temperature range is -20 to 50 °C.
Where can I find the AXIS Audio Manager Edge application?
The AXIS Audio Manager Edge application is pre-installed on the AXIS C1410 Mk II.
Troubleshooting
Speaker not powering on
Check the power connection, ensure the Ethernet cable is securely connected, and verify the PoE switch or injector is functioning correctly.
No audio output
Verify the audio source settings in the web interface, check the volume level, and ensure the speaker is not muted.
Poor audio quality
Check the network connection for any bandwidth issues. Make sure the speaker is not placed in an area that can cause echoes. Update firmware
Microphone not working
Verify the microphone settings in the web interface and test the microphone functionality. Check the mic placement and surrounding environment.
Pros and Cons
Pros
- All-in-one design simplifies installation and reduces the need for additional equipment.
- Two-way audio functionality enhances communication and interaction.
- Wide-area audio coverage reduces the number of speakers needed.
- Integration with existing systems minimizes disruption.
- Made with recycled materials, promoting environmental responsibility.
Cons
- Requires a wired IP network connection.
- Microphone can be affected by ambient noise if not in a controlled setting.
- Limited to a single speaker unit per location if more coverage is not required.
- Installation requires some technical knowledge.
- Depending on the installation environment, the speaker's design might not be ideal for all aesthetic preferences.
Setup, Compatibility & Care
Setup
- Network Connection: Connect the speaker to your IP network via an Ethernet cable.
- Power: The speaker supports Power over Ethernet (PoE), so connect to a PoE-enabled switch or injector. If PoE is not available, you will need to use a separate power adapter.
- Software Configuration: Access the speaker's web interface to configure network settings, audio sources, and other features.
Compatibility
The AXIS C1410 Mk II is compatible with:
- Video Management Software (VMS)
- Voice over IP (VoIP) telephony systems (SIP)
- AXIS Audio Manager Edge and Center
Care
- Cleaning: Use a slightly damp cloth to wipe the speaker clean. Do not use harsh chemicals or abrasive cleaners.
- Environment: Operate within the specified temperature range (-20 to 50 °C) and humidity levels to ensure optimal performance.