Nicoman Metal Garden Borders - Set of 5
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Nicoman Metal Garden Border set is designed for homeowners looking to create clean, contemporary edges for their lawns, flower beds, and pathways. Its primary benefit is offering a durable, low-maintenance solution for garden division that enhances aesthetic appeal. A potential caveat is that while durable, the pre-rusted finish may transfer color initially. The product offers long-lasting performance with its sturdy metal construction, available in grey or pre-rusted finishes, and features integrated spikes and joining pegs for secure and straightforward installation.
All features
| Model Part Number | 601509 |
|---|---|
| Brand | Nicoman |
Extended Product Information
FAQs
What material are the garden borders made of?
The garden borders are made of durable metal, suitable for outdoor use.
How long is each garden border section?
Each garden border section is 1 meter (approximately 3.3 feet) in length.
What are the dimensions of the visible face of the border?
The visible face of the border is 6.5cm (approximately 2.5 inches) high, with a total height of 15cm (approximately 5.9 inches).
Do I need to treat the pre-rusted finish?
No, the pre-rusted finish is designed to provide a natural, weathered look and requires no additional treatment. It is part of the aesthetic and durable nature of the product.
How are the border sections connected to each other?
The border sections are connected using the included metal joining pegs, which slot into pre-drilled holes on the sides of each section.
Can these borders be used to contain heavy soil or significant landscaping features?
These borders are primarily designed for aesthetic edging and to prevent grass encroachment. For significant soil containment or retaining walls, heavier-duty options would be more appropriate.
What is the advantage of the integrated spikes?
The integrated spikes allow for easy and secure installation directly into the ground without the need for additional stakes or fixings.
Troubleshooting
Border sections are wobbly after installation.
Ensure the integrated spikes are fully hammered into the ground. For softer soil, consider driving the spikes deeper or adding extra soil support around the base. Check that joining pegs are securely fitted between sections.
Difficulty pushing spikes into hard ground.
Pre-digging a shallow trench or loosening the soil with a garden fork can make installation easier. A rubber mallet is recommended for striking the top of the spike.
Pre-rusted finish is rubbing off on hands or clothing.
This may occur initially with the pre-rusted finish. Allow the border to weather for a short period, or gently wipe it down with a dry cloth to remove any loose rust particles before handling extensively.
Sections don't connect smoothly.
Ensure that the joining peg holes on adjacent sections are properly aligned. Slight adjustments to the positioning of the sections may be needed.
Pros and Cons
Pros
- Provides a clean, modern edge to garden beds and pathways.
- Durable metal construction ensures long-term use in outdoor environments.
- Low-maintenance design eliminates the need for regular treatments or upkeep.
- Easy to install with integrated spikes and provided joining pegs.
- Available in two finishes (grey and pre-rusted) to match garden aesthetics.
Cons
- The pre-rusted finish may cause some initial color transfer.
- Requires manual installation, which may be physically demanding for large areas.
- Limited to 15cm height, which might not be sufficient for deeply dug beds.
- Metal can potentially rust through completely over many years of extreme exposure, depending on climate.
Setup, Compatibility & Care
Setting up your Nicoman Metal Garden Borders is designed to be a straightforward process.
Installation:
- Determine the desired layout for your garden border.
- Position the first metal border section where you want the edge to begin.
- Firmly push the integrated spikes into the ground until the border is stable and at the desired height. A rubber mallet can be helpful for tougher soil.
- Align the next border section next to the first, ensuring the connection points align.
- Insert the provided metal joining pegs into the designated holes to secure the two sections together.
- Repeat steps 4 and 5 for all subsequent sections to complete your border.
Compatibility:
- These borders are suitable for use in most soil types, from soft garden soil to firmer ground. Ensure the soil is not excessively rocky, which could impede spike insertion.
- They are compatible with lawns, flower beds, vegetable patches, and pathways.
Care:
- Low Maintenance: The metal is designed for outdoor use and requires no regular maintenance. The pre-rusted finish is intentional and develops naturally over time.
- Cleaning: If the border becomes dirty, it can be wiped clean with a damp cloth. Avoid using abrasive cleaners that could damage the finish.
- Long-Term Performance: While durable, prolonged exposure to highly corrosive environments might eventually affect the metal. However, for typical garden use, expect years of reliable performance.