Shopping.co.uk

Original Gorilla Glue - Brown - 8 Pack

Not AvailableOriginal Gorilla Glue - Brown - 8 Pack

Power through large-scale repairs and demanding construction work with Original Gorilla Glue – a h...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This 8-pack of 500ml Original Gorilla Glue is designed for contractors, workshops, and high-volume DIY projects requiring a robust, waterproof adhesive. Its key benefit is an industrial-strength bond that expands into surfaces for superior holding power, ideal for demanding construction and repair tasks. A potential caveat is its expansion during curing, which requires careful application and clamping.

All features

ColourBrown
BrandGorilla

Extended Product Information

FAQs

How long does Original Gorilla Glue take to cure?

For initial set, clamp for at least 30 minutes. For full strength, allow 24 hours. Curing time can vary based on temperature and humidity.

Is Original Gorilla Glue safe for food contact surfaces?

No, Original Gorilla Glue is not recommended for surfaces that come into direct contact with food.

Can I use Original Gorilla Glue on PVC pipes?

While it bonds many plastics, it is best to test on a small, inconspicuous area first. It may not provide an optimal bond on all types of PVC.

What is the shelf life of Original Gorilla Glue?

When stored properly in a cool, dry place with the cap tightly sealed, Original Gorilla Glue typically has a shelf life of 1-2 years.

How do I clean up uncured Original Gorilla Glue?

Wipe up uncured glue immediately with a dry cloth. For stubborn residue, mineral spirits may be used, but always test on an inconspicuous area first.

Does the brown color affect the appearance of my project?

Original Gorilla Glue dries to a natural wood tone. For projects where color is critical, consider a paint or stain after the glue has fully cured.

Troubleshooting

Glue is not expanding or bonding properly

Ensure at least one surface was lightly dampened with water before application. Insufficient moisture will prevent proper curing and expansion.

Excessive glue squeeze-out

Apply only the necessary amount of glue. Wipe away excess immediately with a dry cloth before it begins to cure. If it has started to cure, it can be carefully scraped or sanded away once fully hardened.

Bottle nozzle clogged

Attempt to carefully clear the clog by piercing it with a small nail or wire. Store the bottle with the cap tightly sealed to prevent future clogs.

Bond feels weak

Ensure surfaces were clean and properly clamped for the entire curing period (ideally 24 hours). Reapply if necessary, ensuring correct application and clamping.

Pros and Cons

Pros

  • Provides a highly durable and permanent bond.
  • Excellent performance in wet or humid conditions due to its waterproof nature.
  • The expansion property helps fill small gaps and creates a very strong mechanical lock.
  • Suitable for a wide range of demanding applications, including structural repairs.
  • Cost-effective for large projects due to the bulk pack and 500ml bottle size.

Cons

  • Expands significantly during curing, which can be messy if not managed properly.
  • Requires clamping for the duration of the cure time to ensure optimal bond strength.
  • Can be difficult to clean up once cured.
  • Requires moisture to cure, so applying to completely dry surfaces may slow the process.
  • Dries to a natural wood tone, which might not be suitable for all aesthetic applications.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure surfaces to be bonded are clean and free from dust, dirt, and oil.
  2. Lightly dampen *one* of the surfaces with water. This activates the glue's expansion properties.
  3. Apply the glue to the *other* surface.
  4. Press the surfaces together firmly.
  5. Clamp the materials securely in place while the glue cures. Use clamps to hold items together for at least 30 minutes, and ideally for 24 hours for maximum strength.

Compatibility:

Original Gorilla Glue is suitable for a wide range of materials including:

  • Wood
  • Metal
  • Stone
  • Ceramic
  • Glass
  • Foam
  • Plastics (test on a small, inconspicuous area first, as results may vary on certain plastics)

Care:

  • Store bottles in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep the bottle cap tightly sealed when not in use to prevent the glue from curing inside the nozzle.
  • After use, clean the nozzle with a dry cloth. If the nozzle becomes clogged, try carefully piercing it with a small nail or wire.