Hensel PE and N Clamp Mounting With DIN Rail - FC PN 10
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Hensel Mi-distributors terminal block (FC PN 10) is a robust electrical solution for professionals in installation, manufacturing, and energy sectors needing reliable power distribution. Its key benefit is flexible wire accommodation with a 35mm DIN-rail mount, enabling efficient configurations. A potential caveat is its specific wire size compatibility, requiring careful planning for diverse setups.
All features
| Model Part Number | FC PN 10 |
|---|---|
| Brand | HENSEL |
Extended Product Information
FAQs
What is the primary purpose of the Hensel FC PN 10?
The primary purpose is to act as a terminal block for power distribution, specifically designed for mounting on a 35mm DIN-rail, and it integrates PE (Protective Earth) and N (Neutral) clamping functions.
What are the wire capacity limits for this terminal block?
It can accommodate one wire up to 25 mm² and four wires up to 4 mm².
What is the current rating of the FC PN 10?
The terminal block has a current rating of 101 A.
Can I use this terminal block for phase (L) connections?
This specific model (FC PN 10) is designed for PE and N connections. For phase connections, you would typically use a different terminal block suited for that purpose.
What type of DIN-rail does this mount on?
It is designed to mount on a standard 35mm DIN-rail.
How do I ensure a secure connection for the wires?
Ensure the wires are stripped to the appropriate length, fully inserted into the designated clamps, and that the clamp screws are securely tightened.
Is this suitable for outdoor electrical installations?
While robust, its suitability for outdoor use depends on the enclosure and environmental conditions. Always ensure proper protection against moisture and environmental factors as per local electrical codes.
Troubleshooting
Terminal block not securing to DIN-rail
Ensure you are using a standard 35mm DIN-rail and that the rail itself is properly mounted and level. Check if the terminal block's mounting mechanism is obstructed or damaged.
Poor electrical connection with a wire
Verify the wire is stripped to the correct length and inserted fully into the clamp. Ensure the clamp screw is tightened adequately to provide firm contact. Check the wire for corrosion or damage.
Overheating during operation
Confirm that the wire sizes are within the specified range (1x 25 mm², 4x 4 mm²) and that the total current does not exceed the 101 A rating. Check all connections for tightness, as loose connections can cause resistance and heat.
Pros and Cons
Pros
- Streamlines installation with integrated PE and N clamps.
- Offers flexible wire capacity for varied conductor sizes.
- Secure DIN-rail mounting enhances stability.
- High current rating suitable for heavy-duty applications.
- Durable construction ensures longevity.
Cons
- Limited to specific wire sizes (1x 25 mm², 4x 4 mm²), may require adapters for other gauges.
- Primarily designed for PE and N connections; not a general-purpose terminal block.
- Requires a 35mm DIN-rail for mounting.
Setup, Compatibility & Care
Setup: The FC PN 10 is designed to be mounted directly onto a standard 35mm DIN-rail. Ensure the rail is securely fastened before attaching the terminal block. Insert wires into the appropriate clamps, ensuring they are stripped to the correct length and firmly secured by tightening the clamp screws. Verify all connections are tight before energizing the circuit.
Compatibility: This terminal block is compatible with standard 35mm DIN-rail systems. It is specifically designed for PE and N connections and accommodates one wire up to 25 mm² and four wires up to 4 mm². Ensure your wire gauges and application requirements align with these specifications.
Care: Regular visual inspection for dust or debris buildup is recommended. Clean only with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure connections remain tight, especially after periods of vibration or thermal cycling.