Barrettine Teak Oil - 500ml - Clear
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to maintain and enhance the natural beauty of their wooden furniture, particularly those made from teak. The primary benefit is the oil's ability to nourish and protect wood, preventing weathering and greying. However, it's important to note the high VOC content, so ensure proper ventilation during application.
All features
| Model Part Number | PTDTIMOITE50 |
|---|---|
| Brand | Barrettine |
Extended Product Information
FAQs
How often should I apply the teak oil?
The frequency depends on the exposure to the elements. For outdoor furniture, reapplication every 6-12 months is recommended. Indoor furniture may require less frequent applications.
Can I use this on painted wood?
No, this product is designed for untreated wood only.
What kind of finish does this oil provide?
It dries to a natural-looking satin-matt finish.
How do I clean the treated surface?
Use a damp cloth to wipe away dirt. Avoid harsh chemicals or abrasive cleaners.
Is this product suitable for all types of wood?
It is best suited for hardwoods like teak, but can be used on other untreated woods.
What is VOC and why is it important?
VOC stands for Volatile Organic Compounds. High VOC content means that it releases chemicals into the air. Always ensure good ventilation when using the product.
What is the coverage of the 500ml bottle?
The coverage is approximately 10 m2 per litre.
How long does it take for the oil to dry?
It takes approximately 24-48 hours to dry, depending on environmental conditions.
Troubleshooting
Oil not absorbing into the wood.
Ensure the wood is untreated and clean. Lightly sand the surface to open the pores if necessary.
Surface feels sticky after drying.
Wipe off any excess oil with a clean cloth. Ensure the oil has dried completely before use.
Uneven finish after application.
Apply the oil evenly, following the grain of the wood. Sand lightly between coats if necessary.
White patches appear after drying.
This may indicate excess oil. Wipe off the excess oil and ensure it dries completely.
Pros and Cons
Pros
- Preserves the natural beauty of wood.
- Easy to apply and maintain.
- Provides a water-resistant finish.
- Helps prevent weathering and greying.
- Reduces the risk of surface splitting.
Cons
- High VOC content requiring good ventilation during use.
- May require multiple applications for optimal protection.
- Drying time of 24-48 hours.
- Not suitable for already sealed or treated wood.
- Requires periodic reapplication for sustained protection.
Setup, Compatibility & Care
- Preparation: Ensure the wooden surface is clean, dry, and free from any previous finishes. Use a suitable cleaner to remove dirt, grease, and old coatings if necessary. Lightly sand the surface if required.
- Application: Apply the teak oil evenly using a brush or cloth. Follow the grain of the wood for the best results.
- Drying: Allow the oil to dry for 24-48 hours, depending on environmental conditions, before use. Avoid exposing the treated surface to rain during the drying period.
- Compatibility: This oil is specifically designed for untreated wood. Do not apply to surfaces that have been previously sealed or treated. Always test on a small, inconspicuous area first.
- Care: Regularly clean the treated surface with a damp cloth to remove dirt and maintain its appearance. Reapply the oil as needed to maintain protection and prevent weathering.