Liberon Quick Drying Tung Oil - 1 L
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Liberon Quick Drying Tung Oil is designed for interior wood surfaces requiring a durable, water-resistant finish, such as kitchen worktops, tables, and general furniture. Its key benefit is rapid drying time, allowing treated items to be used again in as little as 4 hours, while offering excellent protection against water, alcohol, and food acids. A potential consideration is that it is a penetrating oil, meaning it allows the wood to age naturally, which may not be suitable for those seeking a completely inert surface.
All features
| Model Part Number | 104472 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
How many coats of Liberon Quick Drying Tung Oil are recommended?
For general interior wood, 3-4 coats are typically sufficient. For demanding surfaces like kitchen worktops or chopping boards, 5-6 coats are recommended to ensure maximum protection.
Can this oil be used on exterior wood?
No, Liberon Quick Drying Tung Oil is formulated for interior use only. Exterior wood requires products specifically designed to withstand outdoor conditions.
Is this product suitable for bare wood only?
It is primarily designed for bare or previously oiled wood. If applying to a varnished or painted surface, these must be completely removed back to bare wood first.
How long does it take for the finish to fully cure?
While the surface is dry to the touch and usable in about 4 hours, the oil continues to cure and harden over several days. Avoid heavy use or cleaning during this period.
Can I apply other finishes over this oil?
It is generally not recommended to apply other finishes like varnish or lacquer directly over tung oil, as it may not adhere properly. The tung oil itself provides a protective finish.
Does the oil change the color of the wood?
Yes, tung oil will deepen the tone of the wood, giving it a richer, slightly darker appearance, especially noticeable on lighter woods. It enhances the natural grain and color.
How do I clean application tools after use?
Tools used for application should be cleaned immediately after use with mineral spirits or turpentine.
Troubleshooting
Tacky or sticky finish after application.
This usually indicates that too much oil was applied or that it was not properly wiped off. Ensure excess oil is always removed. If the finish is still tacky, try wiping it down with a cloth slightly dampened with the product's solvent (mineral spirits or turpentine), or wait longer as it may still be curing. Ensure good ventilation.
Uneven color or finish.
This can happen if the wood is unevenly absorbent or if application was inconsistent. Ensure the wood is uniformly prepared and apply coats evenly. If the issue persists, lightly sand the affected area and reapply thin, even coats, paying attention to wiping off excess.
Water marks or staining appearing.
This suggests the oil finish is not yet fully cured or has not received enough coats for adequate protection. Ensure the recommended number of coats have been applied and allow sufficient drying time between each. For minor marks, try buffing with a soft cloth. If the finish is failing, the surface may need to be re-oiled.
Pros and Cons
Pros
- Rapid drying time enables quick project completion.
- Excellent resistance to common household liquids and stains.
- Safe for use on food preparation surfaces.
- Enhances natural wood grain and allows for graceful aging.
- Provides a durable, long-lasting protective finish.
Cons
- Requires multiple coats for full protection.
- Penetrating nature may not suit those wanting a completely sealed surface.
- Can alter the wood's color slightly depending on the type of wood.
Setup, Compatibility & Care
Application: Ensure the wood surface is clean, dry, and free from dust or grease. Apply thin, even coats using a brush or lint-free cloth, following the grain. Allow each coat to dry for approximately 4 hours before applying the next. For best results, apply 3-4 coats for general use, and 5-6 coats for surfaces like kitchen worktops. Always wipe away any excess oil that has not penetrated the wood after 15-30 minutes.
Compatibility: Suitable for most interior woods, including hardwoods and softwoods. It is particularly effective on dense woods often found in kitchen environments. Test on an inconspicuous area first, especially if using on previously finished or exotic woods.
Care: Clean treated surfaces with a soft, damp cloth. Avoid harsh detergents or abrasive cleaners. For minor wear, reapply a thin coat of oil as needed. Periodically, a more thorough re-oiling may be necessary to maintain protection, especially on heavily used surfaces.