Gravity Feed Spray Gun - B&Q - 1.8mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This B&Q Gravity Feed Spray Gun is ideal for DIY enthusiasts and professionals working with smaller compressors, offering high transfer efficiency for both water and solvent-based paints. Its key benefit is its low air consumption, making it economical to run. A potential caveat is the need for a specific adaptor for disposable pot systems. This well-balanced gun features a 1.8mm nozzle and is colour-coded for easy setup.
All features
| Model Part Number | FMT3006/1.8 |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What is the main advantage of LVLP spray guns?
LVLP (Low Volume Low Pressure) spray guns offer high transfer efficiency, meaning more paint lands on the surface being sprayed, leading to less waste and reduced overspray.
Can I use this gun with any type of paint?
Yes, this gun is designed to work with both water-based and solvent-based paints.
What size compressor do I need for this spray gun?
It operates efficiently with air consumption between 4.2-6cfm, making it suitable for smaller compressors.
How do I adapt it for disposable paint pots?
You will need to use adaptor number 2, which has a 3M code of 16032.
What does the 1.8mm size refer to?
The 1.8mm refers to the diameter of the nozzle, which is suitable for applying a range of coatings, including primers and thicker finishes.
How often should I clean the spray gun?
It is best practice to clean the spray gun immediately after each use to prevent paint drying and ensure optimal performance for future applications.
Is this gun suitable for fine detail work?
While versatile, the 1.8mm nozzle is generally better suited for broader coverage rather than very fine, intricate detail work, for which smaller nozzle sizes might be preferred.
Troubleshooting
Uneven spray pattern
Check for blockages in the nozzle or air cap. Ensure correct air pressure is being supplied. Adjust fluid and air controls.
Paint not flowing properly
Verify the paint is thinned correctly. Check if the fluid needle or nozzle is clogged. Ensure the gravity cup is not overfilled and the pickup tube is submerged.
Gun is spitting or sputtering
This often indicates air in the fluid line or a partial blockage. Clean the gun thoroughly and check paint consistency.
Excessive overspray
Increase fluid flow or decrease air pressure slightly. Ensure the correct nozzle/air cap combination is used for the paint type.
Pros and Cons
Pros
- Economical to use due to low air consumption
- High paint transfer efficiency reduces waste
- Versatile for different paint types
- User-friendly with color-coded parts
- Suitable for users with smaller air compressors
Cons
- Requires specific adaptor for 3M disposable pot system
- 1.8mm nozzle may not be suitable for very fine detail work
- Performance can be dependent on compressor size and air pressure regulation
Setup, Compatibility & Care
Setup:
- Ensure your air compressor is set to the recommended 4.2-6cfm range.
- Connect your air hose to the gun's air inlet.
- Fill the gravity cup with your chosen paint, ensuring it does not exceed the maximum fill line.
- For 3M disposable pots, attach the correct adaptor (3M code 16032).
- Adjust air and fluid controls as needed for your paint and desired spray pattern.
Compatibility:
- Paints: Compatible with most water-based and solvent-based paints.
- Compressors: Ideal for compressors delivering 4.2-6cfm.
- Disposable Pots: Compatible with 3M disposable pot systems using adaptor number 2 (3M code 16032).
Care:
- Cleaning: Clean the spray gun immediately after each use to prevent paint from drying in the nozzle and cup.
- Disassembly: Partially disassemble according to manufacturer instructions for thorough cleaning.
- Parts: Use appropriate cleaning solvents for the type of paint used. Ensure all fluid passages and air caps are clear.
- Storage: Store in a clean, dry place.