Liberon Patinating Wax - Black - 250ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Liberon Patinating Wax in Black to add a colored finish or highlight areas on their projects. The key benefit of this wax is its ability to create striking effects on various materials like wood, metal, and plaster. Keep in mind that the drying time is quite fast, so work efficiently.
All features
| Model Part Number | 014706 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
What surfaces can I use this wax on?
You can use this wax on wood, metal, gilt, plaster, tone, MDF, and papier-mâché.
How long does it take for the wax to dry?
The wax dries in approximately 5 minutes.
How do I clean a surface treated with Liberon Black Wax?
You can wipe the surface with a damp cloth.
What is the coverage of this wax?
The wax covers approximately 8-12m² per can.
Can I use this wax on outdoor furniture?
No, this wax is designed for interior use only.
How do I remove the wax if I make a mistake?
Use mineral spirits or a wax remover, following the manufacturer's instructions.
Do I need to sand the surface before applying the wax?
It is recommended to sand the surface smooth before application for the best results.
Troubleshooting
Wax appears streaky after application.
Ensure a thin, even coat is applied and buff with a clean cloth after the wax has dried.
Color is not as dark as expected.
Apply a second coat of wax and allow to dry, then buff.
Wax is difficult to apply.
Make sure the surface is clean and smooth. Use a soft cloth or brush and apply in a thin, even layer.
Pros and Cons
Pros
- Adds a beautiful colored finish.
- Works on a variety of materials.
- Ideal for creating aged or antique effects.
- Easy to apply and use.
- Quick drying time.
- Good coverage area.
Cons
- Fast drying time requires efficient work.
- Color is limited to Black.
- May require multiple coats for desired effect.
- Requires proper surface preparation for best results.
- Strong odor during application.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from any old wax or finishes.
- Application: Apply a thin, even coat of the Liberon Black Wax with a soft cloth or brush.
- Drying Time: Allow to dry for approximately 5 minutes.
- Buffing: Buff the surface with a clean, soft cloth to achieve the desired sheen.
- Compatibility: This wax is compatible with wood, metal, gilt, plaster, tone, MDF, and papier-mâché.
- Care: To clean, wipe with a damp cloth.
Note: Always test in an inconspicuous area first to ensure compatibility and desired effect.