Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The d-c-fix Floral - Orange is a decorative self-adhesive film designed for adults looking to easily refresh surfaces with a vibrant orange floral pattern. It offers a straightforward way to personalize your space, though careful application is essential for a smooth, bubble-free finish. This d-c-fix film provides a durable and stylish decorative solution for various household items and furniture.
| Age Group | adult |
|---|---|
| Gender | Female |
| Pattern | Floral |
| Colour | Orange |
| Model Part Number | 99350042014 |
| Brand | d-c-fix |
Yes, d-c-fix films can generally be removed. Gently peel back a corner and slowly pull the film away. If it's difficult to remove, warming it with a hairdryer on a low setting can soften the adhesive and make removal easier. Some adhesive residue might be left, which can usually be cleaned with rubbing alcohol or an adhesive remover.
The d-c-fix Floral film is water-resistant, making it suitable for surfaces that might get splashed, such as kitchen or bathroom cabinets. However, it is not recommended for full submersion in water or areas with constant heavy moisture contact.
This decorative film is designed primarily for indoor use. Exposure to direct sunlight, extreme temperatures, and harsh weather conditions outdoors can cause the film to fade, peel, or become brittle over time, reducing its lifespan and appearance.
You will need a measuring tape or ruler, a sharp craft knife or utility knife, and a squeegee or soft cloth (like a felt-tipped squeegee or a credit card wrapped in a cloth) to smooth out the film and prevent bubbles.
When applied to suitable, well-prepared surfaces (like sealed wood, laminate, or metal), d-c-fix film typically removes cleanly. However, on delicate surfaces, unsealed wood, or poorly painted surfaces, there is a risk of paint peeling or residue being left behind. Always test in an inconspicuous area first if you are concerned about the surface.
Applying d-c-fix film over existing wallpaper is generally not recommended. Wallpaper surfaces can be too textured, or the adhesive of the film might cause the wallpaper to tear or peel upon application or removal. It's best applied to smooth, painted, or finished surfaces for optimal results and adhesion.
When applying, slowly peel the backing paper and use a squeegee or soft cloth to smooth from the center outwards. For existing small bubbles, carefully pierce with a sharp pin and gently smooth out the air towards the hole.
Ensure the surface is completely clean, dry, and smooth. Remove any dust, grease, or residue. For very smooth or glossy surfaces, a light sanding can improve adhesion. Avoid applying in cold temperatures, as adhesive performs better at room temperature.
Ensure all edges are firmly pressed down during the initial application. If lifting occurs after some time, gently re-adhere using a hairdryer on a low setting to warm the adhesive slightly, then press firmly with a soft cloth. For persistent lifting, a very thin line of clear adhesive might be used, but this is a last resort.
This film is compatible with most smooth, non-porous surfaces such as laminate, metal, glass, plastic, and painted wood. *Avoid heavily textured, dusty, or damp surfaces*, as adhesion may be compromised and results unsatisfactory.
To clean, simply wipe the film with a damp cloth and mild soap. Avoid abrasive cleaners or scrubbing pads, which can damage the surface of the film. For light dirt or dust, a dry microfiber cloth is sufficient.
