Optimate Motorcycle Battery Charger & Optimiser - 0.8A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Optimate Motorcycle Battery Charger & Optimiser is designed for owners of 12v Lithium LiFePO4 motorcycle batteries. Its key benefit is maintaining and charging these specific batteries with a low 0.8A charge rate, ideal for long-term storage or recovering slightly discharged batteries. A caveat is its 0.8A charge rate, which is not suitable for rapidly charging larger capacity batteries, focusing instead on maintenance for up to 50Ah and direct charging for up to 10Ah. This charger automatically maintains batteries, preventing sulfation and extending battery life.
All features
| Model Part Number | OPT3LI |
|---|---|
| Brand | Optimate |
Extended Product Information
FAQs
What type of batteries is this charger compatible with?
This charger is specifically designed for 12-volt Lithium Iron Phosphate (LiFePO4) batteries only.
What is the maximum battery capacity this charger can maintain?
It is suitable for optimising and maintaining batteries with a capacity of up to 50Ah.
Can I use this charger on a standard lead-acid motorcycle battery?
No, this charger is specifically tuned for Lithium LiFePO4 batteries and should not be used with lead-acid or other battery chemistries.
How long does it take to charge a 10Ah battery?
At a 0.8A charge rate, charging a completely depleted 10Ah battery could take approximately 12-14 hours. However, the charger is optimized for maintenance and topping off rather than rapid charging from empty.
Can I leave this charger connected all the time?
Yes, the charger is designed to be safely left connected to the vehicle during storage. It will automatically manage the charge to keep the battery in optimal condition without overcharging.
What does 'optimiser' mean in the product name?
An optimiser refers to the charger's ability to not only charge the battery but also to perform diagnostic and maintenance functions, such as desulfation (though primarily for lead-acid) and maintaining optimal voltage levels to prolong battery lifespan.
What should I do if the charger doesn't seem to be charging my battery?
First, double-check that the battery is a compatible 12v LiFePO4 type. Ensure the polarity is correct when connecting the clamps. If the battery is severely discharged, the charger might not initiate, and you may need a different method to bring the voltage up slightly before using this optimiser.
Troubleshooting
Charger not powering on
Ensure the charger is properly plugged into a working AC outlet and that the battery connectors are securely attached to the battery terminals.
Battery not charging
Verify that the battery is a 12v Lithium LiFePO4 type and within the compatible capacity range. Check for any damage to the battery or cables. Ensure the battery voltage is not critically low, which might prevent the charger from initiating a charge.
Charger indicates an error (refer to charger LEDs if applicable)
Consult the charger's specific LED indicator guide (if provided separately) for error codes. Common issues include reversed polarity or a battery that is too far discharged for the recovery mode to initiate.
Slow charging performance
The 0.8A charge rate is intentional for maintenance and optimization. If you require faster charging for a depleted battery, a higher amperage charger may be necessary, ensuring it is still compatible with LiFePO4 technology.
Pros and Cons
Pros
- Optimized for Lithium LiFePO4 batteries, ensuring safe and effective charging.
- Ideal for long-term storage, keeping batteries topped up and healthy.
- Automatic charging and maintenance cycles simplify battery care.
- Can revive moderately discharged batteries.
- Easy to use with a straightforward connection process.
Cons
- 0.8A charge rate is slow for fully depleted or larger capacity batteries.
- Primarily designed for maintenance and trickle charging, not rapid charging.
- Only compatible with 12v Lithium LiFePO4 batteries.
- Requires user to verify product compatibility before purchase.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the charger is unplugged from the power outlet.
- Connect the charger's eyelet connectors to the corresponding positive (+) and negative (-) terminals of your 12v Lithium LiFePO4 battery. Ensure a secure connection.
- Plug the charger into a suitable AC power outlet.
- The charger will automatically begin the charging and maintenance cycle.
Compatibility:
- This charger is exclusively designed for 12v Lithium LiFePO4 batteries.
- It is suitable for charging batteries with a capacity of up to 10Ah.
- It is suitable for optimising and maintaining batteries with a capacity of up to 50Ah.
- Crucially, verify your battery type and voltage before ordering to ensure compatibility.
Care:
- Keep the charger in a dry, well-ventilated area.
- Avoid exposing the charger to extreme temperatures or moisture.
- Clean the exterior of the charger with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Periodically inspect the cables and connectors for any signs of damage.