Bartoline Teak Oil Wood Furniture Sealer Protector - 500mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Bartoline Teak Oil is designed for individuals looking to restore and protect garden furniture or traditional interior wooden pieces, especially hardwoods like Oak and Teak. Its key benefit is replacing oils lost to weathering, providing a durable, matt finish. A caveat to be aware of is the potential fire hazard from soiled application cloths, requiring immediate and safe disposal.
All features
| Model Part Number | TK4560 |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
What type of wood is this Teak Oil best suited for?
It is especially suited for hardwoods such as Oak and Teak.
Can I use this on furniture that has been painted?
No, the surface must be free of paint or stain. You will need to remove any existing paint or stain with sandpaper before application.
How long should I wait between coats?
For best results, allow 24 hours between each coat.
What is the risk associated with used application cloths?
Soiled application cloths can be liable to self-igniting without warning. They must be washed immediately with soapy water and disposed of safely outside.
How do I clean my tools after using the Teak Oil?
Clean equipment with White Spirit.
Will this product leave a shiny finish?
No, Bartoline Teak Oil is designed to provide a traditional matt finish.
Troubleshooting
Wood still looks dull after application
Ensure the surface was properly prepared and free of grease. Apply an additional coat, allowing adequate drying time between coats.
Uneven finish or blotchiness
Wipe away any excess oil that may not have fully penetrated. Ensure even application across the surface and allow sufficient drying time.
Surface remains sticky after drying
Excess oil was likely not removed during application. Buff the surface with a clean, dry cloth. If still sticky, a light sanding and reapplication of a thin coat may be necessary.
Pros and Cons
Pros
- Effectively restores and protects hardwood furniture.
- Provides a natural, non-greasy matt finish.
- Easy to apply with spray or brush.
- Suitable for both indoor and outdoor wooden items.
Cons
- Requires careful handling of used cloths due to self-ignition risk.
- Application of multiple coats requires significant drying time.
- Not suitable for previously painted or stained surfaces without preparation.
Setup, Compatibility & Care
Preparation is crucial for best results.
- Ensure Surface is Clean and Dry: The wood must be completely free of moisture and debris.
- Remove Old Finishes: If the surface has old paint or stain, remove it using sandpaper.
- Degrease: Wipe the wood with a cloth dampened with White Spirit to remove any grease or dirt.
Application Instructions:
- Spray the Teak Oil liberally onto the prepared surface.
- Use a clean cloth or brush to rub the oil well into the wood grain.
- Wipe away any excess oil.
- For optimal protection and finish, apply 2 to 3 coats, allowing a full 24 hours of drying time between each coat.
After Use Care:
- Fire Hazard Warning: Soiled application cloths (rags, brushes) can self-ignite. Immediately after use, wash all cloths thoroughly with soapy water.
- Disposal: Dispose of washed cloths safely outdoors, away from any ignition sources.
- Equipment Cleaning: Clean brushes and spray equipment with White Spirit.
Compatibility:
This product is especially suited for hardwoods such as Oak and Teak. It is ideal for garden furniture or traditional matt finished interior furniture.