Warren Reed Designer Bathroom Splashback - Terracotta Quartz Effect Glass
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners looking to upgrade their bathroom's aesthetic with a modern, easy-to-maintain splashback. The Warren Reed Designer Bathroom Splashback offers a significant benefit by providing a stylish, hygienic, and grout-free alternative to traditional tiles. A potential caveat is its specific size (W600mm x H250mm), which may require careful placement planning. Key features include its construction from 6mm toughened glass with a high-quality print, moisture and stain resistance, and simple, drill-free installation.
All features
| Model Part Number | 5056782158076 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What material is the splashback made from?
The splashback is made from 6mm toughened safety glass with a high-quality print.
Is the splashback suitable for showers or wet rooms?
This splashback is designed for use behind bathroom basins and is resistant to moisture, but not intended for direct, prolonged water exposure found in showers or wet rooms.
How do I clean the splashback?
Clean with a soft, damp cloth and warm, soapy water. Avoid abrasive cleaners.
Do I need to drill holes to install it?
No, installation is designed to be drill-free. It is adhered to the wall using a suitable bathroom-grade adhesive (not included).
What are the exact dimensions of the splashback?
The dimensions are 600mm in width and 250mm in height (W600mm x H250mm).
Can I cut the splashback to a custom size?
No, the toughened glass cannot be cut after manufacturing. It is supplied in the fixed dimensions of W600mm x H250mm.
Does it come with adhesive?
No, a suitable bathroom-grade adhesive for mounting glass to walls is required but not included with the splashback.
Troubleshooting
Splashback does not adhere well.
Ensure the wall surface was clean, dry, and free of dust or grease before applying adhesive. Use a high-quality, bathroom-grade adhesive suitable for glass and wall mounting. Allow adequate curing time for the adhesive.
Visible marks or streaks after cleaning.
Use a soft, lint-free cloth for drying. Avoid using paper towels which can leave residue. For stubborn marks, try a mild glass cleaner specifically designed for mirrors and glass surfaces.
Difficulty in aligning the splashback perfectly.
It is recommended to have a second person assist with holding and aligning the splashback during installation. Measure and mark the intended position on the wall beforehand.
Pros and Cons
Pros
- Provides a modern and elegant aesthetic upgrade.
- Highly resistant to moisture, mould, and stains, perfect for bathrooms.
- Grout-free design simplifies cleaning and maintenance.
- Easy and quick installation process with no drilling needed.
- Durable construction from 6mm toughened safety glass.
Cons
- Fixed size (W600mm x H250mm) may not fit all spaces.
- Requires careful alignment during installation to avoid gaps.
- Not suitable for areas with extreme heat or direct, prolonged water exposure beyond a basin splash zone.
- Adhesive for installation is not included and needs to be purchased separately.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface behind the basin is clean, dry, and smooth.
- Carefully position the splashback to check the fit and alignment.
- Apply a suitable bathroom-grade adhesive (not included) to the back of the splashback or the wall according to adhesive instructions.
- Press the splashback firmly into place against the wall.
- Hold in place or use temporary supports until the adhesive sets (refer to adhesive instructions for curing times).
- Wipe away any excess adhesive immediately.
Compatibility:
- Designed for use behind bathroom basins.
- Suitable for most standard basin installations.
- Note: Ensure the intended wall surface is flat and structurally sound to support the glass.
Care:
- Clean regularly with a soft, damp cloth and warm, soapy water.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals that could damage the glass surface or print.
- Rinse thoroughly with clean water and dry with a soft, lint-free cloth.