Liberon Gilt Cream - Versailles - 30ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Liberon Gilt Cream in Versailles is designed for DIY enthusiasts, woodworkers, and antique restorers looking to achieve a professional metallic finish on decorative items or furniture. It excels at both concealing damage on existing gilding and adding a luxurious gold tone to new projects. While highly effective, it requires careful surface preparation and patient layering to achieve the best results, making it less suitable for those seeking a single-coat, high-speed solution.
All features
| Colour | Gold |
|---|---|
| Model Part Number | LIBGCVER30 |
| Brand | Liberon |
Extended Product Information
FAQs
Do I need to prime my surface before using this cream?
Yes, if the surface is porous like raw wood or plaster, you must use Liberon Fontenay Base to ensure a professional finish.
Can I mix this with other colors?
Yes, all colors in the Liberon Gilt Cream range are fully intermixable, allowing you to create custom gold tones.
How long should I wait before buffing the surface?
You should wait at least 4 hours for the cream to dry, though allowing it to dry longer will result in a more durable finish.
Can I use this on floors or kitchen cabinets?
No, this product is intended for decorative gilding and is not formulated to withstand the wear and tear of floors or high-use cabinets.
How do I apply this to intricate moldings?
Use a small, fine-bristled brush to gently push the cream into the recesses, then buff the high points after it dries.
Is one coat enough?
While one coat may provide coverage, the best results are achieved by applying several thin coats.
Troubleshooting
The finish looks dull or patchy
This often occurs on unsealed porous surfaces. Ensure you have applied Liberon Fontenay Base before the cream.
The cream is too thick or difficult to spread
Apply using a slightly dampened cloth or work in very small amounts to maintain control.
The finish looks uneven after drying
You may have applied a coat that was too thick. Gently buff the surface and apply a thinner, lighter coat over the top.
Pros and Cons
Pros
- Easy to apply with basic tools like a cloth or small brush
- Excellent for touch-ups on damaged gilt frames and ornaments
- Colors are fully intermixable for bespoke shade creation
- Builds a professional, durable metallic appearance
- Suitable for both restoration and new creative projects
Cons
- Requires a dedicated base coat on porous surfaces
- Slow drying time requires a minimum of 4 hours per coat
- Multiple thin coats are needed for a high-quality finish
- Not suitable for high-traffic or heavily handled surfaces
Setup, Compatibility & Care
To prepare your project, ensure the target surface is completely clean, dry, and free of dust or oils. For porous materials like raw wood, plaster, or unsealed MDF, you must prime the surface with Liberon Fontenay Base. Failure to seal these surfaces can lead to uneven absorption and a dull finish.
Application should be done in a well-ventilated area. After use, store the container tightly sealed in a cool, dry place to prevent the cream from hardening. If you are working on a complex piece, keep a small brush with soft bristles handy to push the cream into tight corners that a cloth cannot reach.