Coovar Raw Linseed Oil 500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Coovar Raw Linseed Oil 500ml is designed for wood enthusiasts and craftspeople seeking a traditional, nourishing, and protective treatment for both new and aged wood. Its key benefit is versatile application, suitable for interior and exterior projects, specialized uses like softening putty and French polishing, and protecting items like cricket bats and oak beams. A potential caveat is the recommendation for a test patch on old oak to ensure compatibility, suggesting careful application for aged surfaces.
All features
| Model Part Number | BB/271/0408/C |
|---|---|
| Brand | Coovar |
Extended Product Information
FAQs
How long does it take for the oil to dry?
Drying time can vary significantly based on temperature, humidity, and wood porosity, typically ranging from 24 to 72 hours for a full cure. Ensure good ventilation.
Can I use this oil on exterior garden furniture?
Yes, Coovar Raw Linseed Oil is suitable for exterior wood applications, providing nourishment and protection. Reapplication may be needed periodically to maintain protection.
What is the coverage rate?
The coverage is approximately 10 square meters per litre.
Is this oil suitable for interior flooring?
While it provides protection, it is a traditional oil and may require frequent reapplication on high-traffic flooring. It is best suited for applications where a traditional finish is desired and heavy wear is not a primary concern.
How do I clean up application tools?
Tools can be cleaned with mineral spirits or turpentine. Be aware that cloths soaked with linseed oil can spontaneously combust; lay them flat to dry completely outdoors before disposal or soak them in water.
Can I use this on wood that has been previously treated?
This oil is best applied to bare, unfinished wood. If the wood has an existing finish, it may not penetrate correctly. A test patch is advised, or the old finish may need to be removed.
Troubleshooting
Wood appears unevenly colored after application.
Ensure excess oil was thoroughly wiped away after application. Unevenness may indicate inconsistent absorption; reapply to lighter areas after drying.
Oil is not penetrating the wood.
Verify the wood surface is clean, dry, and unfinished. Old finishes or excessive dirt can prevent absorption. Consider a light sanding if necessary.
Surface remains tacky after application.
This usually means too much oil was applied or excess was not removed. Gently wipe the surface with a cloth dampened with a small amount of mineral spirits, then re-wipe with a dry cloth. Allow more drying time.
Test patch on old oak shows undesirable color change.
Do not proceed with full application. Consider alternative wood treatments or sealants that are known to be compatible with aged oak.
Pros and Cons
Pros
- Versatile for interior and exterior wood applications.
- Dual purpose: nourishes wood and aids in specific craft techniques like French polishing.
- Suitable for protecting valuable items like cricket bats and preserving oak.
- Easy to apply with common tools.
- Good coverage rate for cost-effectiveness.
Cons
- Requires a test patch for aged oak timbers to ensure surface compatibility.
- Requires removal of excess oil for optimal results, adding a step to the process.
- Traditional formulation may not suit modern synthetic finishes.
- Drying time can be longer compared to modern quick-dry finishes.
Setup, Compatibility & Care
Setup: No complex setup is required. Ensure the wood surface is clean, dry, and free from dust or old finishes before application.
Compatibility: This oil is compatible with most bare wood surfaces, including new installations and aged oak. For aged oak, it is highly recommended to perform a test patch in an inconspicuous area first to assess compatibility and the desired aesthetic outcome. It is not intended for use over existing synthetic sealants or varnishes.
Care: Apply the oil using a clean cloth or brush, working it into the wood grain. Allow the oil to penetrate; once saturation is achieved, wipe away any excess oil with a clean, dry cloth. Allow adequate drying time between coats, which can vary depending on environmental conditions. For maintenance, reapply as needed when the wood appears dry or dull.