WAGO Staggered Insulated Jumper - 12 Pin - 2002-482
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WAGO 2002-482 is a 12-position staggered insulated jumper designed for professionals and DIYers working with TOPJOB S 2002 Series DIN rail terminal blocks. It provides a reliable, efficient method for commoning circuits while maintaining electrical safety, though it is specifically engineered for a narrow compatibility range within the TOPJOB S ecosystem.
All features
| Model Part Number | 2002-482 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
Can I cut the 12-way jumper to a smaller size?
Yes, the jumper can be carefully trimmed to create custom lengths for specific project requirements.
Is the 2002-482 compatible with 2004 series terminal blocks?
No, this jumper is specifically designed for the 2002 series geometry.
What is the maximum voltage rating?
The component is rated for use in systems up to 400V.
Do I need special tools for installation?
No, the jumper is designed for push-in installation by hand.
Is the jumper reusable?
Yes, you can remove and re-insert the jumper, provided the contact pins have not been physically deformed.
Troubleshooting
Jumper does not seat properly
Verify that all 2002 series terminal blocks are aligned perfectly on the DIN rail and that no wires are obstructing the entry slot.
High resistance or intermittent connection
Remove the jumper and check for debris in the terminal contact slot, then re-insert to ensure a full, deep connection.
Pros and Cons
Pros
- Significantly reduces wiring time for multi-terminal circuits
- High current capacity of 25A for reliable power distribution
- Insulated construction enhances workplace safety
- Tool-free push-in installation
- Compact 61.2 mm width keeps control cabinets organized
Cons
- Compatible only with WAGO TOPJOB S 2002 series
- Fixed 12-way length may require trimming for smaller circuits
- Cannot be used for non-standard DIN rail terminal systems
Setup, Compatibility & Care
To install the 2002-482, ensure your terminal blocks are firmly mounted on the DIN rail. Align the jumper pins with the center slot of the terminal blocks and apply firm downward pressure until you hear or feel the connection seat into the push-in terminal.
Compatibility: This product is strictly compatible with the WAGO TOPJOB S 2002 Series terminal block family. Do not attempt to force this into non-compatible series as it may damage the terminal interface.
Care: The jumper is maintenance-free, but it should be kept free of dust, conductive debris, and moisture. Inspect the connection periodically during routine cabinet maintenance to ensure the jumper has not been dislodged by external wiring force.