Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone using U-POL Isopon Fastglas Polyester Laminating Resin (SSSRE-SM) to repair damaged bodywork. It provides a quick and easy solution, allowing for repairs in under 30 minutes. Be aware that this resin is specifically designed for use with glass fibre mats and tissues, ensuring optimal results. This guide will walk you through the key features, best practices, and troubleshooting tips for effective use.
| Model Part Number | SSSRE-SM |
|---|---|
| Brand | U-POL |
The shelf life can vary, but it's typically around 12 months when stored properly. Always check the expiration date on the container.
This resin is designed for use on bodywork. It may not adhere well to all types of plastic. Always test on a small, inconspicuous area first.
Wear appropriate safety gear, including gloves and eye protection. Work in a well-ventilated area to avoid inhaling fumes. Avoid contact with skin.
The amount of resin needed will depend on the size and depth of the damage. Always purchase enough resin for the entire repair to avoid running out mid-project.
Yes, once the resin is fully cured and sanded, you can prime and paint it like any other bodywork surface.
Contain the spill immediately with an absorbent material. Allow the resin to cure before disposal, and follow local regulations for waste disposal.
Ensure the correct amount of hardener was mixed with the resin. Check the product's expiration date. Ensure you are working in a suitable temperature.
Apply the resin in thin layers, allowing each layer to partially cure before applying the next. Avoid applying too much resin at once.
Allow the resin to fully cure before sanding. Use appropriate sandpaper grades, starting with coarser grits and working up to finer grits for a smooth finish.
