Versacraft Pad - Poppy Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tsukineko Versacraft Pad in Poppy Red is designed for crafters and artists looking to add permanent color to fabric, paper, wood, leather, and unglazed pottery. Its key benefit is its versatility across multiple mediums, offering archival quality and permanence on fabric when heat set. A primary consideration is that ink may wash out of fabrics before heat setting, and some staining can occur.
All features
| Model Part Number | VK114 |
|---|---|
| Brand | Tsukineko |
Extended Product Information
FAQs
What surfaces can I use the Versacraft ink pad on?
You can use it on fabric, unpainted wood, uncoated paper, Japanese papers, tanned leather, and unglazed pottery.
How do I make the ink permanent on fabric?
After stamping and allowing the ink to dry, heat set the design using an iron on a 'cotton' or 'high' setting for at least 15 seconds, or use a heat gun on wood and terracotta. For fabrics, items can be washed after heat setting.
Will the ink stain my fabric before heat setting?
Yes, some staining may occur on fabrics before the ink is heat set. It is recommended to pre-wash fabrics to remove sizing and heat set promptly after stamping and drying.
How long does the ink take to dry?
Drying time varies depending on the surface material and humidity levels. It can range from minutes on paper to several hours on wood or leather.
Can I re-ink the Versacraft pad?
Yes, the Versacraft pad can be re-inked using Tsukineko's Versacraft ink refills, available separately.
Is this ink archival?
Yes, the ink is opaque and permanent, making it ideal for archival scrapbooking projects after proper drying and heat setting where applicable.
What is the size of the ink pad?
The raised pad size is 76mm x 47mm.
Troubleshooting
Ink does not transfer well to stamp.
Ensure the stamp surface is clean and dry. Press the stamp firmly and evenly into the ink pad. If the pad appears dry, re-ink with Versacraft refill ink.
Stamped image on fabric washes out.
The ink was likely not properly heat set. Ensure you followed the heat setting instructions precisely (iron or heat gun) after the ink has dried.
Ink appears faded on wood or leather.
Drying time may have been insufficient, or the surface may be less absorbent than expected. Allow more drying time, and consider applying a sealant after the ink has fully cured if needed.
Pad feels too wet or sticky.
Allow the pad to air dry for a few hours. Ensure the lid is closed tightly when not in use to prevent over-saturation.
Pros and Cons
Pros
- Versatile use on a wide range of porous and semi-porous materials.
- Achieves permanent and washable results on fabric with heat setting.
- Opaque and fade-resistant ink is suitable for archival projects.
- Rich, consistent Poppy Red color.
- Easy to use with raised pad for better ink coverage.
Cons
- Requires heat setting for permanence on fabrics, which may not be suitable for all fabric types.
- Ink can wash out before heat setting.
- Potential for staining on fabrics prior to heat setting.
- Drying time varies significantly based on surface and environmental conditions.
- Not recommended for non-porous surfaces like glass or metal.
Setup, Compatibility & Care
Setup: The Versacraft Pad is ready to use directly from the packaging. Ensure stamps are clean and dry before applying ink.
Compatibility: This ink pad is compatible with a wide array of porous and semi-porous materials including:
- Fabric (cotton, linen, etc.)
- Unpainted wood
- Uncoated paper and Japanese papers
- Tanned leather
- Unglazed pottery
Care: To maintain the ink pad's performance:
- Storage: Store the pad lid tightly closed in a cool, dry place away from direct sunlight.
- Cleaning: If the pad surface becomes dry, you can re-ink it with Tsukineko's Versacraft ink refills (sold separately). If the pad surface becomes dirty, gently wipe it with a slightly damp cloth and allow it to air dry completely before use. Avoid harsh cleaners.
- Heat Setting (Fabric): For fabric application, heat set the stamped image by ironing (cotton/high setting) for at least 15 seconds or using a heat gun. Pre-wash fabric to remove sizing and allow the ink to dry fully before heat setting.