Selections Railway Sleeper Brackets - Galvanised Steel
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Selections Railway Sleeper Brackets made from galvanised steel to construct landscaping features. These brackets offer a straightforward method for securing railway sleepers and timber boards, providing sturdy support for various outdoor projects. Keep in mind that while the brackets are durable, the longevity of your project will depend on the quality of the sleepers and the conditions they are exposed to.
All features
| Brand | Selections |
|---|
Extended Product Information
FAQs
What tools do I need to install the brackets?
You'll need a hammer or mallet, a screwdriver or drill, and possibly a measuring tape to ensure accurate placement.
Can these brackets be used with treated timber?
Yes, these brackets are compatible with treated timber, which is often used outdoors.
How deep should I insert the brackets into the ground?
Insert the brackets deep enough to ensure stability, typically 10-20 cm, depending on the ground conditions and the height of your sleepers.
Are the included screws rust-resistant?
The provided screws are designed to be weather-resistant, suitable for outdoor use.
How many brackets do I need for my project?
The number of brackets needed depends on the size of your project and the length of your sleepers. As a general rule, space the brackets approximately every meter.
Can these brackets be used for vertical structures?
Yes, these brackets are suitable for vertical structures. Ensure you securely fix the sleepers to the brackets and that the ground is stable.
What is the thickness of the steel used in the brackets?
The steel used in the brackets is 1.5mm thick.
What are the dimensions of each bracket?
Each stake measures 41cm long by 10.5cm wide at the fixing end, with an overall depth of 2.5cm.
Troubleshooting
Bracket won't go into the ground.
Ensure the ground is clear of obstructions like rocks or roots. Try pre-digging a small hole or using a rubber mallet to avoid damaging the bracket.
Screws are difficult to install.
Pre-drill pilot holes in the timber boards to make screwing easier. Use a drill with the correct bit size.
Brackets show signs of rust.
Clean the rust with a wire brush and apply a rust-resistant sealant. Ensure the brackets are properly installed and not exposed to excessive moisture.
Pros and Cons
Pros
- Easy and quick installation process.
- Durable galvanised steel construction offers weather resistance.
- Versatile use for multiple landscaping purposes.
- Includes necessary fixings, saving time and effort.
- Cost-effective with a pack of 10 brackets.
Cons
- Requires a hammer for installation.
- May require pre-drilling depending on the type of timber used.
- The brackets' effectiveness depends on the ground conditions.
Setup, Compatibility & Care
- Installation: Knock the brackets into the ground, using a hammer if necessary. The serrated teeth will help provide grip.
- Fixing: Screw the brackets to your wooden sleepers or timber boards using the provided fixings. Ensure the screws are tightened securely.
- Compatibility: Compatible with various types of wooden sleepers and timber boards. Consider the thickness of your wood when choosing these brackets.
- Care: Inspect the brackets periodically for any signs of damage or corrosion. Clean with a damp cloth if necessary.
- Environment: Suitable for outdoor use in various weather conditions, thanks to the galvanised steel.