Wiska Tkep 32+ Ip68 Plastic Tails Gland Kit - 32mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wiska TK-EP 32+ IP68 Plastic Tails Gland Kit is designed for electricians requiring an 18th Edition compliant solution for wiring consumer units. Its key benefit is simplifying the installation of meter tails and earth through a single point, ensuring cable retention, preventing eddy currents, and maintaining fire integrity. A potential consideration is that it requires specific insert types (plastic, brass, or flame-retardant) which must be selected based on application needs.
All features
| Model Part Number | 10111319 |
|---|---|
| Brand | Wiska |
Extended Product Information
FAQs
What does 18th Edition compliant mean for this product?
It means the product is designed to meet the safety and technical requirements of the 18th Edition of the IET Wiring Regulations, particularly concerning consumer unit installations.
What are the different insert types and when should I use them?
Inserts are available in plastic, brass, and flame-retardant materials. Plastic is standard, brass offers greater mechanical strength, and flame-retardant is used where fire resistance is critical.
Can this gland be used for multiple cables?
The kit is designed to accommodate meter tails and earth, usually meaning two large conductors and one earth. Specific configurations depend on the cable sizes and the chosen insert.
What is the significance of the IP68 rating?
IP68 signifies that the gland offers complete protection against dust ingress and is suitable for continuous immersion in water under specified conditions, making it robust for various environments.
How do I determine the correct insert for my installation?
Consult your local wiring regulations and site-specific risk assessment. Generally, standard installations use plastic, while environments requiring higher mechanical strength or fire performance may need brass or flame-retardant inserts.
What is the maximum cable size this gland can accommodate?
The 32mm size refers to the entry hole diameter. The actual cable accommodation depends on the specific insert used and the combined diameter of the meter tails and earth cable.
Troubleshooting
Gland does not seal properly
Ensure the correct insert is used and fully seated. Verify that the gland cap is tightened to the appropriate torque specification. Check for any debris on the gland or enclosure sealing surface.
Cable retention feels loose
Confirm that the correct size insert is being used for the cable diameter. Ensure the gland cap is tightened sufficiently to grip the cable and insert.
Difficulty feeding cables through the insert
Check if the cables are properly aligned and not twisted. Ensure the insert is clean and free of any obstructions. For multiple cables, consider if a different insert type or configuration is needed.
Gland does not meet IP68 rating
Re-check all sealing surfaces and ensure the gland cap and locking nut are fully tightened. Inspect the gland for any cracks or damage that could compromise the seal.
Pros and Cons
Pros
- Enhances safety by ensuring compliance with 18th Edition wiring regulations.
- Streamlines installation process by consolidating meter tails and earth entry.
- Provides reliable cable retention and protects against eddy currents.
- Maintains the fire integrity of the electrical enclosure.
- Offers excellent protection against environmental factors with IP68 rating.
Cons
- Requires selection of the correct insert type (plastic, brass, flame-retardant) for the specific application.
- May be more complex to install than standard cable glands for very basic applications.
- Specific dimensions (32mm) may limit its use with thicker cable bundles.
- Requires proper torque settings during installation to ensure seal and retention.
Setup, Compatibility & Care
Setup:
- Select the appropriate insert (plastic, brass, or flame-retardant) based on your installation requirements.
- Prepare the consumer unit enclosure by drilling or punching a 32mm entry point.
- Insert the gland body through the enclosure wall and secure it using the provided locking nut.
- Feed the meter tails and earth cable through the selected insert.
- Insert the prepared insert with cables into the gland body.
- Tighten the gland cap firmly to secure the cables and create a seal. Ensure cables are properly stripped and terminated within the consumer unit.
Compatibility:
- Compatible with consumer units designed for 32mm cable entry.
- Suitable for meter tails and main earth conductors.
- Requires selection of the correct insert type for optimal performance and safety.
Care:
- Periodically inspect the gland for any signs of damage or wear.
- Ensure the gland remains securely tightened.
- Clean the exterior with a damp cloth if necessary; avoid harsh chemicals.