Siamese Cat Face Splashart Kitchen Splashback - W600mm x H600mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Premium 6mm Glass Kitchen Splashback by Warren Reed - Designer is for homeowners looking to add both style and functionality to their kitchen. Its key benefit is providing a striking, hygienic, and durable surface that is easy to clean and install. A potential caveat is the need for specific adhesive for installation, as drilling is not recommended.
All features
| Model Part Number | WR00731-P450 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use for installation?
You must use a Clear Natural Curing Adhesive. Follow the adhesive manufacturer's specific instructions for application and curing times.
Can I drill holes in the glass splashback?
No, drilling into toughened glass is not recommended and will likely cause it to shatter. Installation should be done using adhesive without drilling.
How do I clean the splashback?
Clean with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Wipe spills promptly.
What are the available sizes for this splashback?
This model is available in various sizes including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm. The specific product is W600mm x H600mm.
Is the printed design protected from heat?
Yes, the high-resolution print is sealed behind the 6mm toughened glass, which is heat resistant up to 400°C, protecting the design from cooking heat.
What is the warranty period for this splashback?
The splashback comes with a 1-year guarantee.
Can this splashback be used behind any type of hob?
It is suitable for use behind most hobs, but direct contact with open flames should be avoided. Always follow safety guidelines for your specific hob type.
Troubleshooting
Splashback not adhering to the wall
Ensure the wall surface was properly prepared (clean, dry, free of dust/grease). Verify that the correct type of Clear Natural Curing Adhesive was used and applied correctly according to its instructions. Check that the adhesive has had sufficient time to cure.
Surface appears cloudy or streaky after cleaning
Use a soft microfiber cloth and a recommended non-abrasive cleaner. Avoid excessive amounts of cleaner. Rinse with clean water and dry thoroughly with a clean, dry microfiber cloth.
Accidental scratch on the surface
While the glass is scratch-resistant, deep scratches may be unavoidable. Minor surface scuffs can sometimes be polished out with specialized glass polish, but consult the manufacturer before attempting.
Pros and Cons
Pros
- Enhances kitchen aesthetics with a unique art design.
- Durable and long-lasting due to toughened glass construction.
- Easy to maintain and keep clean, promoting kitchen hygiene.
- Simple installation process without the need for drilling.
- Heat and scratch-resistant, suitable for busy kitchen environments.
Cons
- Requires specific Clear Natural Curing Adhesive for installation.
- Glass is heavy and requires careful handling during installation.
- Limited to the specific 'Siamese Cat Face Splashart' design, may not suit all decor styles.
- A 1-year guarantee may be shorter than some competing products.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface is clean, dry, and free from dust or grease.
- Use a Clear Natural Curing Adhesive specifically recommended for glass splashbacks. Apply the adhesive evenly to the wall or the back of the splashback according to the adhesive manufacturer's instructions.
- Carefully position the splashback onto the wall, applying firm, even pressure to ensure good adhesion.
- Allow the adhesive to cure completely as per its instructions before exposing the splashback to heat or moisture.
Compatibility:
- This splashback is designed for use as a kitchen splashback, protecting walls behind hobs and work surfaces.
- It is compatible with most standard kitchen setups.
- Avoid direct contact with open flames.
Care:
- Clean regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner.
- Wipe away spills and splatters immediately to prevent staining.
- Do not use abrasive pads, harsh chemicals, or scouring agents, as they can damage the surface or print.