Frenchic Trim Paint - Steel Teal - 500ML
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Trim Paint in Steel Teal is designed for DIY enthusiasts and homeowners looking to refresh interior woodwork and furniture with a durable, satin finish. Its key benefit is its all-in-one formulation, acting as a primer, sealer, and topcoat, reducing project time. A minor consideration is the coverage rate, which requires careful calculation for larger projects.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 39780695310423 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need a primer before using this paint?
No, this Frenchic Trim Paint is self-priming and self-sealing, eliminating the need for a separate primer on most surfaces.
What surfaces can I use this paint on?
It is suitable for interior woodwork, furniture, radiators, metal, kitchen cupboards, and laminate furniture.
How long does it take to dry?
Drying time is typically 2-4 hours between coats, but this can vary based on environmental conditions such as temperature and humidity. Ensure the surface is dry to the touch before recoating.
What is the coverage rate?
A 500ml tin covers approximately 7m² with one coat, or 3.5m² with two recommended coats.
Is this paint suitable for children's items?
Yes, the formula is certified safe for children's toys (EN71-3), making it a safe choice for nurseries and children's furniture.
How do I clean my brushes after use?
Clean brushes and equipment immediately after use with water.
What kind of finish does this paint provide?
It provides a soft-satin sheen, which is a subtle, less reflective finish than gloss.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly cleaned and dry before application. Lightly abrade very glossy surfaces. Ensure adequate drying time between coats.
Brush marks or roller marks are visible
Apply thin, even coats. Use a high-quality synthetic brush or a short-nap roller. Avoid overworking the paint. Allow the first coat to dry completely before applying the second.
Uneven colour or coverage
Stir the paint thoroughly before and during use. Apply two recommended coats for full opacity and durability. Ensure consistent application technique.
Paint appears too thick
Ensure the paint has been stirred thoroughly. If necessary, very slightly thin with a small amount of water (less than 5%), but this is generally not required.
Pros and Cons
Pros
- All-in-one primer, sealer, and topcoat simplifies the painting process.
- Durable, scuff-resistant finish increases longevity on high-traffic items.
- Low VOC and low odour formula enhances user comfort and environmental consideration.
- Versatile application on a wide range of interior surfaces.
- Child-safe certification makes it ideal for nurseries and children's furniture.
Cons
- Coverage is approximately 3.5m² per litre for two recommended coats, requiring precise measurement for larger areas.
- Satin finish may not be suitable for those preferring a matte or high-gloss look.
- Requires adequate drying time between coats for optimal performance.
Setup, Compatibility & Care Instructions
Preparation
Ensure the surface is clean, dry, and free from dust, grease, and loose material. For best adhesion, lightly abrade glossy surfaces with fine-grit sandpaper and wipe clean. No separate primer or sealer is required for most surfaces.
Application
Stir the paint thoroughly before use. Apply with a good quality synthetic brush or roller. Two thin coats are recommended for maximum durability and colour depth. Allow adequate drying time between coats (typically 2-4 hours, but may vary depending on temperature and humidity).
Compatibility
Suitable for interior woodwork, furniture, radiators, metal, kitchen cupboards, and laminate. Not intended for exterior use or floors.
Care
Clean brushes and equipment immediately after use with water. For maintenance, wipe the painted surface with a soft, damp cloth. Avoid abrasive cleaners or scrubbing, as this can damage the finish.