Clarke Battery Charger - 6A - 12V
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Clarke LA6 12V battery charger is an ideal solution for home mechanics and vehicle owners who need a reliable, compact device to maintain lead-acid batteries up to 60Ah. This charger provides a consistent 6A charge rate to keep batteries healthy, though it is specifically designed for smaller vehicle batteries and should not be used for high-capacity deep-cycle or leisure batteries exceeding the 60Ah limit.
All features
| Model Part Number | PTDCLA6266305 |
|---|---|
| Brand | Clarke |
Extended Product Information
FAQs
Can I use this charger on a 24V system?
No, the Clarke LA6 is strictly designed for 12V lead-acid batteries.
Does this charger turn off automatically?
No, the LA6 does not have an automatic shut-off feature, so you should monitor the ammeter and disconnect it once the battery is charged.
Will this work with AGM batteries?
This model is designed for standard lead-acid batteries and is not recommended for AGM or Gel battery types.
How do I know when the battery is full?
The ammeter needle will drop toward zero as the battery reaches its full capacity.
Is it safe to leave the charger on overnight?
It is not recommended to leave the charger unattended for long periods as it lacks an automatic float or maintenance mode.
Troubleshooting
Ammeter needle does not move
Ensure the crocodile clips have a secure, clean connection to the battery terminals and verify that the mains power is switched on.
Charger gets very hot
Disconnect the charger and allow it to cool down; ensure you are not exceeding the 60Ah battery limit and that the vents are not obstructed.
Device sparks when connecting
Always ensure the power is switched off at the wall before attaching or removing the clips from the battery.
Pros and Cons
Pros
- Integrated ammeter for visual charge monitoring
- Compact and lightweight for easy storage
- Built-in safety protections against short circuits and heat
- Double insulated casing for increased safety
Cons
- Limited to batteries up to 60Ah
- Not compatible with gel or AGM battery types
- Lacks automatic shut-off/maintenance mode
Setup, Compatibility & Care
Before plugging the unit into a 230V mains supply, ensure the vehicle battery is a lead-acid type with a capacity of 60Ah or less. Keep the charging area well-ventilated to prevent the buildup of gases. To maintain the device, keep the casing dry and ensure the crocodile clips are free from corrosion; wipe them with a damp cloth if needed. Always disconnect the mains supply before removing the clips from the battery terminals to prevent sparking.