Soudal Parquet Adhesive - Brown
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Soudal Parquet Adhesive in Brown is designed for DIYers and professionals looking for a reliable, water-free bonding solution for various wood flooring types. Its key benefit is a highly flexible, ready-to-use formula that accommodates wood movement and is suitable for underfloor heating, ensuring a durable installation. A minor caveat is its specific formulation for parquet and wooden flooring, making it less suitable for other construction materials.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 116249 |
| Brand | Soudal |
Extended Product Information
FAQs
Can I use this adhesive for laminate flooring?
This adhesive is specifically designed for solid and multi-layered parquet and wooden flooring. For laminate flooring, a different type of adhesive or installation method may be required.
Is this adhesive suitable for exterior use?
No, Soudal Parquet Adhesive is formulated for interior applications only.
What is the working time of the adhesive?
The exact working time can vary based on environmental conditions. Refer to the product's technical data sheet for specific details, but it is designed for practical application without excessive drying before the flooring is laid.
How long does it take for the floor to be ready for light foot traffic?
Typically, light foot traffic is possible after approximately 24 hours, but full curing and load-bearing capacity take longer. Always consult the product's technical data sheet for precise curing times.
Can I use this on a concrete subfloor?
Yes, provided the concrete subfloor is properly prepared, dry, and free from contaminants. It is compatible with most common subfloors suitable for wood flooring installation.
What is the shelf life of the adhesive?
When stored correctly in its original, unopened packaging, the adhesive typically has a shelf life of 12 months. Please check the packaging for the exact expiration date.
Troubleshooting
Adhesive not bonding properly
Ensure the subfloor is clean, dry, and properly prepared. Verify that the correct trowel size was used and that adhesive was applied evenly. Check that the parquet is pressed firmly into the adhesive.
Floor feels spongy or unstable
This might indicate insufficient adhesive coverage or inadequate pressing of the boards. Ensure full coverage and proper contact. Allow adequate curing time before heavy use.
Excess adhesive on wood surface
Wipe away fresh excess adhesive immediately with a clean, damp cloth. For dried adhesive, carefully scrape it off once fully cured, taking care not to damage the wood finish.
Pros and Cons
Pros
- Versatile compatibility with different parquet types and exotic woods.
- Water-free formula prevents wood swelling or damage.
- Convenient ready-to-use application.
- Excellent flexibility to handle wood movement.
- Safe to use with underfloor heating systems.
Cons
- Primarily designed for parquet and wooden flooring, not general construction.
- Brown color may not be suitable for all aesthetic requirements if visible.
- Requires proper surface preparation for optimal adhesion.
Setup, Compatibility & Care
Setup: Ensure the subfloor is clean, dry, and free from dust, grease, or loose particles. Apply the adhesive evenly using a suitable notched trowel (refer to product data sheet for specific trowel recommendations). Lay the parquet or wooden floor elements into the wet adhesive, pressing down firmly to ensure full contact.
Compatibility: This adhesive is specifically formulated for multi-layered and solid parquet and wooden flooring with tongue and groove joints. It is also suitable for gluing exotic woods. Ensure compatibility with any existing subfloor treatments or primers before application. Not recommended for use with other types of flooring or construction materials.
Care: Keep the adhesive in its original, tightly sealed container in a cool, dry place. Avoid exposure to extreme temperatures. Once cured, the bonded floor can be cleaned using standard household cleaning methods for wooden floors. Avoid excessive moisture.