Sealey Quick Set Liquid Metal - Multicolor
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is designed for users of the Sealey Quick Set Liquid Metal (SCS380) who need a reliable solution for bonding or repairing metal components. It's ideal for those seeking a durable, versatile product that can be drilled, filed, tapped, and painted after curing. Keep in mind that while it's effective on most metals, the specific application and surface preparation are crucial for optimal results.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | SCS380 |
| Brand | Sealey |
Extended Product Information
FAQs
What metals can I use this on?
The Sealey Quick Set Liquid Metal works on most metals including steel, but always test on a small area first.
How long does it take to cure?
Curing time varies depending on the temperature and specific product, always refer to the instructions.
Can I paint over it?
Yes, once fully cured, it can be painted. Allow full curing time before painting.
How should I store the product?
Store in a cool, dry place away from extreme temperatures and direct sunlight.
Is it safe to use?
Always wear appropriate safety equipment, such as gloves and eye protection, when using this product.
What is the shelf life?
The shelf life depends on storage conditions; always check the product packaging for specific details.
Troubleshooting
Bonding fails
Ensure the surfaces are clean and properly prepared. Roughen the surface for better adhesion. Make sure the epoxy and hardener were mixed correctly.
Slow curing time
Ensure the product is stored at the correct temperature. Make sure the correct ratio of hardener and epoxy was used.
Pros and Cons
Pros
- Provides a strong bond on various metal surfaces.
- Offers versatility for different repair applications.
- Allows for post-cure finishing such as drilling and painting.
- Easy to use due to its twin syringe design and dispensing method.
Cons
- Requires proper surface preparation for optimal adhesion.
- Curing time is required before the repaired item can be used.
- May not be suitable for all types of metal or extreme conditions.
- Limited to the 25ml capacity for larger projects.
Setup, Compatibility & Care
- Preparation: Clean and degrease the surfaces to be bonded. Lightly roughen the surface for better adhesion.
- Dispensing: Use the twin syringe to dispense the epoxy and hardener in the correct ratio.
- Mixing: Mix the components thoroughly until a uniform mixture is achieved.
- Application: Apply the mixture to the surfaces to be bonded and clamp or hold them together until cured.
- Curing: Allow the product to cure completely according to the manufacturer's instructions before machining or painting.
Compatibility: The product is compatible with most metals. Always test on a small, inconspicuous area first.
Care: Store in a cool, dry place. Avoid extreme temperatures. Properly clean the dispensing nozzle after use.