Eaton Easy Battery+ - Battery Replacement 9130 Tower (2000, 3000) - EB005SP
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Eaton Easy Battery+ (EB005SP) is designed for Eaton UPS customers seeking a streamlined battery replacement process. Its key benefit is enabling a quicker and safer exchange of multiple batteries compared to individual swaps, ensuring continuous UPS performance. A potential consideration is its specific compatibility with certain Legacy Eaton UPS models. This product features a complete battery tray pre-loaded with 8 Sealed Lead Acid (VRLA) batteries, each 12V and 9Ah, totaling 96V for the UPS system.
All features
| Model Part Number | EB005SP |
|---|---|
| Brand | Eaton |
Extended Product Information
FAQs
What is the main advantage of the Eaton Easy Battery+?
The primary advantage is a significantly faster and safer battery replacement process for compatible Eaton UPS models, as it involves swapping a complete tray rather than individual batteries.
Which Eaton UPS models are compatible with the EB005SP?
The EB005SP is compatible with the Eaton 9130 Tower (2000VA and 3000VA) and the Eaton 9130 Marine (2000 and 3000VA) models.
What type of batteries are included?
The unit includes 8 Sealed Lead Acid (VRLA) batteries, each with a 12V rating and 9Ah capacity.
How long do these batteries typically last?
Sealed Lead Acid (VRLA) batteries typically have a service life of 3-5 years, but this can vary based on environmental conditions, load, and usage patterns.
Do I need any special tools for installation?
Basic tools may be needed to open the UPS access panel, but the battery tray itself is designed for tool-less insertion and removal, often requiring only manual effort.
What is the total voltage and capacity provided by this battery tray?
The tray provides a total voltage of 96V (8 batteries x 12V) and consists of 8 batteries, each with a 9Ah capacity.
How should I dispose of the old battery tray?
Old batteries are considered hazardous waste. They should be recycled or disposed of according to local environmental regulations. Contact your local waste management authority for guidance.
Troubleshooting
UPS does not power on after battery replacement.
Ensure the battery tray is fully seated and properly connected. Verify the UPS is receiving AC power. Check that the main UPS power switch is engaged.
UPS indicates a battery fault or low battery warning.
Confirm the battery tray is the correct model for your UPS. Ensure no battery connections within the tray appear loose or damaged. Contact Eaton support if the issue persists.
Battery tray is difficult to insert or remove.
Ensure no obstructions are in the battery compartment. Check that the tray is aligned correctly with the rails. Do not force the tray; if resistance is met, re-examine alignment.
Pros and Cons
Pros
- Significantly speeds up battery replacement time.
- Improves safety by reducing direct handling of individual batteries.
- Pre-assembled unit minimizes potential for installation errors.
- Ensures consistent battery voltage and capacity for UPS.
- Designed to maintain optimal UPS operational status.
Cons
- Limited compatibility, specifically for Eaton 9130 Tower (2000VA/3000VA) and 9130 Marine models.
- Requires careful handling of the entire tray assembly.
- Sealed Lead Acid (VRLA) batteries have a finite lifespan and will eventually need replacement.
- Weight of the complete tray (24.5 kg) may require assistance for installation.
Setup, Compatibility & Care
Compatibility:
- This battery tray is specifically designed for:
- Eaton 9130 Tower (2000VA and 3000VA models)
- Eaton 9130 Marine (2000 and 3000VA models)
- Verify your UPS model number before purchasing to ensure compatibility.
Setup:
- Power Down UPS: Safely shut down the UPS system according to the manufacturer's instructions.
- Disconnect Power: Unplug the UPS from the main power source.
- Access Battery Compartment: Open the designated battery access panel on the UPS.
- Remove Old Tray: Carefully slide out the old battery tray. Note its orientation.
- Install New Tray: Slide the Eaton Easy Battery+ tray into the UPS, ensuring it is seated correctly and in the same orientation as the old one.
- Secure Compartment: Close and secure the battery access panel.
- Reconnect Power: Plug the UPS back into the main power source.
- Power On UPS: Turn on the UPS system and monitor for proper operation.
Care:
- Store the Easy Battery+ unit in a cool, dry environment before installation.
- Avoid physical damage to the battery tray.
- The batteries are Sealed Lead Acid (VRLA) and do not require maintenance. Replacement will be necessary after their service life, typically 3-5 years depending on usage and environment.
- Dispose of old batteries responsibly according to local regulations.