Cure It Hardener - Summer Grade - 1kg
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for roofers and DIY enthusiasts using Cure It Hardener - Summer Grade. It helps ensure the durability and longevity of your fibreglass roof by providing instructions on mixing and application. Keep in mind that this specific hardener is designed for use in warmer conditions.
All features
| Brand | Cure It |
|---|
Extended Product Information
FAQs
What is the correct mixing ratio for the hardener?
The recommended mixing ratio is 1% to 2% of the Cure It Hardener - Summer Grade to the Cure It resin.
What should I do if the resin is not hardening?
Check the mixing ratio, ensure the hardener is fresh, and verify that the ambient temperature is suitable for the Summer Grade.
Can I use this hardener with other brands of resin?
No, this hardener is specifically designed for use with Cure It resin and topcoat.
How should I store the Cure It Hardener?
Store it in a cool, dry place, away from direct sunlight.
What safety precautions should I take?
Always wear gloves and eye protection when handling the hardener and resin.
Is this hardener suitable for use in cold weather?
No, this is the Summer Grade, specifically designed for warmer conditions. For colder weather, use the appropriate hardener for that climate.
How long does it take for the resin to cure?
Curing time depends on the ambient temperature. Follow the Cure It resin instructions for specific curing times.
Troubleshooting
Resin not hardening properly.
Check the hardener ratio. Ensure you've used 1% to 2% of the Cure It Hardener - Summer Grade. Verify that the product is within its expiry date. Make sure the ambient temperature is suitable for the Summer Grade.
Surface imperfections after application.
Ensure even application. Check the mixing process for consistency. Sand down any rough areas and reapply the topcoat.
Pros and Cons
Pros
- Enhances the durability of fibreglass roofs.
- Specifically formulated for use in warmer climates.
- Easy to mix with Cure It resin.
- Extends the lifespan of roofing projects.
- User-friendly design for both professionals and DIY users.
Cons
- Only effective when mixed with Cure It resin and topcoat.
- Not suitable for use in colder conditions.
- Requires careful measurement for correct ratio.
Setup, Compatibility & Care
- Preparation: Ensure the resin and topcoat are Cure It products.
- Mixing: Use the Fibreglass Resin Catalyst Dispenser for accurate measurement. Add 1% to 2% of the hardener to the resin.
- Application: Apply the mixture evenly to the fibreglass roof.
- Compatibility: This hardener is specifically designed for use with Cure It resin and topcoat.
- Storage: Store the hardener in a cool, dry place away from direct sunlight.
- Safety: Always wear appropriate personal protective equipment (PPE), including gloves and eye protection, when handling the hardener and resin.