Humbrol 50ml Enamel Paint Tinlet - No 11 Silver Metallic
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Humbrol 50ml Enamel Paint Tinlet in No. 11 Silver Metallic is ideal for hobbyists and model builders looking for a versatile, solvent-based paint. Its key benefit is its fast-drying formula and suitability for a wide range of surfaces, offering a metallic finish. A potential caveat is the need for proper ventilation due to its solvent base.
All features
| Brand | Humbrol |
|---|
Extended Product Information
FAQs
Can I use this paint on metal models?
Yes, this paint is suitable for use on metal surfaces. Ensure the metal is clean and free from rust or grease for best adhesion.
How long does it take to dry?
Humbrol enamel paints are fast-drying. Typically, touch dry within 10-20 minutes, depending on conditions. Recoat after about 1 hour.
Do I need to thin this paint for airbrushing?
Yes, it is recommended to thin the paint with Humbrol Enamel Thinners for airbrush use to achieve the best spray pattern and finish.
What is the coverage of a 50ml tin?
A 50ml tin covers approximately 1.0m², but this can vary depending on the thickness of application and the surface porosity.
How do I clean my brushes after using this paint?
Clean your brushes immediately after use with Humbrol Enamel Thinners. Water or soap will not be effective.
Can I mix this silver with other Humbrol enamel colours?
Yes, Humbrol enamel paints are designed to be intermixable, allowing you to create custom shades. However, always test mixed colours on a scrap piece first.
Is this paint suitable for outdoor use?
While the paint offers good adhesion, its long-term durability for outdoor use may vary depending on environmental exposure. For best results, ensure it is applied to a suitable sealed surface and consider a clear coat for added protection.
Troubleshooting
Paint is too thick for brushing.
Stir the paint thoroughly. If still too thick, add a small amount of Humbrol Enamel Thinners until the desired consistency is reached.
Poor adhesion to the surface.
Ensure the surface is clean, dry, and free from dust or grease. Consider applying a primer suitable for the substrate before painting.
Uneven or streaky finish.
Apply multiple thin coats rather than one thick coat. Ensure even brush strokes or airbrush coverage. Stir paint frequently during application.
Metallic particles not evenly distributed.
Stir the paint vigorously for several minutes before and during application to ensure the metallic pigment is fully mixed.
Pros and Cons
Pros
- Fast-drying for efficient project completion.
- Adheres well to a wide variety of surfaces.
- Provides a realistic metallic silver finish.
- Good coverage from a 50ml tin.
- Can be brushed directly from the tin or airbrushed with thinners.
Cons
- Solvent-based, requiring good ventilation.
- May require a primer on some surfaces for optimal adhesion.
- Needs to be tested on a small area for compatibility with specific materials.
- Can be messy if not handled carefully.
- Specific finish is metallic, limiting options if other finishes are desired without additional products.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface to be painted is clean, dry, and free from grease or dust.
- For plastics, it's recommended to test compatibility on an inconspicuous area first.
- Stir the paint thoroughly before use to ensure the metallic particles are evenly distributed.
Compatibility:
- Ideal For: Most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, and sealed hardboard.
- Application Methods: Can be applied directly from the tin using a brush. For airbrushing, thin with Humbrol Enamel Thinners to the desired consistency.
- Substrates: Always test on a small, hidden area of the material to confirm suitability and adhesion before committing to the entire project.
Care:
- Storage: Store the tin in a cool, dry place away from direct sunlight and sources of ignition. Ensure the lid is tightly sealed after use.
- Cleaning: Brushes and equipment should be cleaned immediately after use with Humbrol Enamel Thinners. Dried paint can be difficult to remove.
- Ventilation: Use in a well-ventilated area due to the solvent-based nature of the paint.