StrataRise Tpe Flat Roof Breather Vent With Cover - 1 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for roofing professionals and building owners seeking a durable and effective ventilation solution for flat roofs with single-ply membrane systems. The StrataRise TPE Flat-Roof Breather Vent offers reliable pressure equalization by managing trapped moisture and air, preventing common roof failures like blistering and delamination. While highly durable, installation requires proper adhesion or welding techniques for a watertight seal.
All features
| Model Part Number | TPEBV-360/120/360-01 |
|---|---|
| Brand | StrataRise |
Extended Product Information
FAQs
What is the primary purpose of the StrataRise TPE Flat-Roof Breather Vent?
Its primary purpose is to equalize air pressure and allow trapped moisture vapor to escape from beneath the flat roof membrane, preventing issues like blistering and delamination.
What materials is this vent compatible with?
It is designed for single-ply membrane systems such as EPDM, TPO, and modified bitumen roofing.
How is the vent installed?
It can be installed using standard roofing adhesives or by heat welding it directly to the roofing membrane.
Why is TPE material beneficial for roof vents?
TPE offers excellent flexibility, UV resistance, and performance in cold weather without cracking or warping, ensuring a durable and long-lasting seal.
Does this vent require regular maintenance?
No, the TPE material is highly weather-resistant and designed for a maintenance-free lifespan. Routine roof inspections are still recommended.
What are the dimensions of the vent?
The vent measures approximately Ø 360mm in diameter, with a height of 120mm, and a length of 360mm.
Can this vent be used on any type of roof?
It is specifically designed for flat or low-slope roofs with single-ply membrane systems. It is not intended for pitched or steep-slope roofs.
Troubleshooting
Vent appears loose or not sealing properly.
Check if the adhesive has fully cured or if the heat weld is complete and secure. Re-adhere or re-weld if necessary, ensuring proper surface preparation.
Water pooling directly around the vent base.
Ensure the surrounding membrane is properly installed and flashed. The vent itself is designed for vapor release, not to be a primary water barrier if the surrounding roof has drainage issues.
Vent material seems brittle or cracked (unlikely with TPE).
This indicates a material defect or extreme environmental exposure beyond typical specifications. Contact the manufacturer if this occurs shortly after installation.
Pros and Cons
Pros
- Prevents roof blistering and membrane delamination by releasing trapped moisture and gases.
- Highly durable and weather-resistant TPE material ensures long-term performance.
- Maintains a watertight seal despite roof movement and temperature fluctuations.
- Requires minimal maintenance due to its robust construction.
- Compatible with various single-ply membrane roofing systems.
Cons
- Requires specific installation techniques (adhesives or heat welding) for optimal performance.
- May require specialized tools for heat welding.
- The initial cost might be higher than basic plastic vents.
- Professional installation is recommended to ensure proper sealing and longevity.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the roof surface is clean, dry, and free from debris where the vent will be installed.
- The vent can be adhered using standard roofing adhesives compatible with TPE membranes. Apply adhesive evenly around the vent's base.
- Alternatively, for a more permanent and robust seal, the vent can be heat-welded to the roof membrane using appropriate techniques and equipment for TPE materials.
- Position the vent over the intended opening and press firmly to ensure full contact. Allow adhesives to cure fully as per manufacturer instructions.
Compatibility:
This vent is designed for use with single-ply membrane systems, including EPDM, TPO, and modified bitumen roofing. It is particularly suited for flat or low-slope roof assemblies.
Care:
The StrataRise TPE Flat-Roof Breather Vent is designed for a maintenance-free lifespan. Its TPE material is highly resistant to UV radiation, ozone, and extreme temperatures. Regular roof inspections should still be performed to ensure the surrounding membrane is intact and that the vent remains free from significant debris. No specific cleaning is typically required.